BSI - Health and Safety Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI DD 180 | EN-Guide for the Assessment of Toxic Hazards in Fire in Buildings and Transport | |
| BSI DD 256 | EN-Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption - Specification | |
| BSI DD 7971-9 | EN-Protective clothing and equipment for use in violent situations and in training - Part 9: Training suits and equipment - Requirements and test methods | |
| BSI DD CEN ISO/TS 11135-2 | EN-Sterilization of health care products - Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 | |
| BSI DD CEN ISO/TS 17665-2 | EN-Sterilization of health care products - Moist heat Part 2: Guidance on the application of ISO 17665-1 | |
| BSI DD CEN ISO/TS 17892-6 | EN-Geotechnical investigation and testing - Laboratory testing of soils Part 6: Fall cone test | |
| BSI DD CEN ISO/TS 22367 | EN-Medical laboratories - Reduction of error through risk management and continual improvement-CORR: August 31 2009; CORR: April 30 2010 | |
| BSI DD CEN/TS 14243 | EN-Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities | |
| BSI DD CEN/TS 14405 | EN-Characterization of waste Leaching behaviour tests Up-flow percolation test (under specified conditions) | |
| BSI DD CEN/TS 14421 | EN-Hose tail and ferrule for crimping and swaging | |
| BSI DD CEN/TS 14429 | EN-Characterisation of waste Leaching behaviour tests Influence of pH on leaching with initial acid/base addition | |
| BSI DD CEN/TS 14507-1 | EN-Inhalational nitric oxide systems Part 1: Delivery systems | |
| BSI DD CEN/TS 14507-2 | EN-Inhalational nitric oxide systems Part 2: Supply systems | |
| BSI DD CEN/TS 14793 | EN-Stationary source emission Intralaboratory validation procedure for an alternative method compared to a reference method | |
| BSI DD CEN/TS 14966 | EN-Wood-based panels - Small scale indicative test methods for certain mechanical properties | |
| BSI DD CEN/TS 14997 | EN-Characterization of waste Leaching behaviour tests Influence of pH on leaching with continuous pH-control | |
| BSI DD CEN/TS 15117 | EN-Guidance on direct and extended application | |
| BSI DD CEN/TS 15119-1 | EN-Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use | |
| BSI DD CEN/TS 15119-2 | EN-Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground fresh wa | |
| BSI DD CEN/TS 15279 | EN-Workplace exposure - Measurement of dermal exposure - Principles and methods | |
| BSI DD CEN/TS 15364 | EN-Characterization of waste Leaching behaviour tests Acid and base neutralization capacity test | |
| BSI DD CEN/TS 15366 | EN-Winter and road service area maintenance equipment - Solid absorbents intended for road usage | |
| BSI DD CEN/TS 15439 | EN-Biomass gasification - Tar and particles in product gases - Sampling and analysis | |
| BSI DD CEN/TS 15447 | EN-Mounting and fixing in reaction to fire tests under the Construction Products Directive | |
| BSI DD CEN/TS 15674 | EN-Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods | |
| BSI DD CEN/TS 15675 | EN-Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements | |
| BSI DD CEN/TS 1948-4 | EN-Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs | |
| BSI DD CLC/TS 50418 | EN-Safety of machinery Electro-sensitive protective equipment Passive infra-red protective devices (PIPDs) | |
| BSI DD CLC/TS 61496-3 | EN-Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) | |
| BSI DD CLC/TS 62046 | EN-Safety of machinery - Application of protective equipment to detect the presence of persons | |
| BSI DD CLC/TS 62441 | EN-Accidentally caused candle flame ignition for audio/video communication and information technology equipment | |
| BSI DD ENV 12537-1 | EN-Medical Informatics - Registration of Information Objects Used for EDI in Healthcare - Part 1: The Register | |
| BSI DD ENV 12718 | EN-Medical Compression Hosiery | |
| BSI DD ENV 12719 | EN-Medical Thrombosis Prophylaxis Hosiery | |
| BSI DD ENV 60695-2-4/2 | EN-Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 2: 500 W Nominal Test Flames and Guidance (IEC 695-2-4/2: 1994) (N) | |
| BSI DD ENV 737-6 | EN-Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum | |
| BSI DD ENV ISO 13530 | EN-Water Quality - Guide to Analytical Quality Control for Water Analysis | |
| BSI DD ENV ISO/TR 13843 | EN-Water Quality - Guidance on Validation of Microbiological Methods-CORR 13488: October 11 2001 | |
| BSI DD IEC TS 61334-5-5 | EN-Distribution automation using distribution line carrier systems Part 5-5: Lower layer profiles Spread spectrum-fast frequency hopping (SS-FFH) profile | |
| BSI DD IEC/PAS 62545 | EN-Environmental Information on Electrical and Electronic Equipment (EIEEE) | |
| BSI DD IEC/PAS 62587 | EN-Method for measuring performance of portable household electric room air cleaners | |
| BSI DD IEC/PAS 62596 | EN-Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines | |
| BSI DD IEC/TS 60479-1 | EN-Effects of current on human beings and livestock - Part 1: General aspects-CORR 17146: June 29 2007 | |
| BSI DD IEC/TS 60695-6-2 | EN-Fire hazard testing Part 6-2: Smoke obscuration Summary and relevance of test methods | |
| BSI DD IEC/TS 60695-8-3 | EN-Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products | |
| BSI DD IEC/TS 60695-9-2 | EN-Fire hazard testing Part 9-2: Surface spread of flame Summary and relevance of test methods | |
| BSI DD IEC/TS 62306 | EN-Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields | |
| BSI DD ISO/PAS 18152 | EN-Ergonomics of human-system interaction - Specification for the process assessment of human-system issues | |
| BSI DD ISO/PAS 20282-3 | EN-Ease of operation of everyday products - Part 3: Test method for consumer products | |
| BSI DD ISO/PAS 20282-4 | EN-Ease of operation of everyday products - Part 4: Test method for the installation of consumer products | |
| BSI DD ISO/TS 10993-19 | EN-Biological evaluation of medical devices Part 19: Physico-chemical morphological and topographical characterization of materials | |
| BSI DD ISO/TS 10993-20 | EN-Biological evaluation of medical devices - Part 20: Principles and methods for immunotoxicology testing of medical devices | |
| BSI DD ISO/TS 11080 | EN-Dentistry - Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water | |
| BSI DD ISO/TS 14048 | EN-Environmental management Life cycle assessment Data documentation format | |
| BSI DD ISO/TS 14415 | EN-Ergonomics of the thermal environment - Application of international standards to people with special requirements | |
| BSI DD ISO/TS 14934-4 | EN-Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests | |
| BSI DD ISO/TS 16489 | EN-Water quality Guidance for establishing the equivalency of results-CORR 16787: December 29 2006 | |
| BSI DD ISO/TS 16976-1 | EN-Respiratory protective devices - Human factors - Part 1: Metabolic rates and respiratory flow rates | |
| BSI DD ISO/TS 17924 | EN-Soil quality - Assessment of human exposure from ingestion of soil and soil material - Guidance on the application and selection of physiologically based extraction methods for the estimation of the human bioacce | |
| BSI DD ISO/TS 18308 | EN-Health informatics Requirements for an electronic health record architecture | |
| BSI DD ISO/TS 18835 | EN-Inhalational anaesthesia systems Draw-over vaporizers and associated equipment | |
| BSI DD ISO/TS 19979 | EN-Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses | |
| BSI DD ISO/TS 21220 | EN-Particulate air filters for general ventilation - Determination of filtration performance | |
| BSI DD ISO/TS 22269 | EN-Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings | |
| BSI DD ISO/TS 22600-2 | EN-Health informatics - Privilege management and access control - Part 2: Formal models | |
| BSI DD ISO/TS 23893-2 | EN-Water quality - Biochemical and physiological measurements on fish - Part 2: Determination of ethoxyresorufin-O-deethylase (EROD) | |
| BSI DD ISO/TS 4869-5 | EN-Acoustics Hearing protectors Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects-ISO/TS 4869-5:2006 | |
| BSI PAS 016 | EN-Integrated Protection Helmets | |
| BSI PAS 41 | EN-Directional Sounders Requirements and tests | |
| BSI PAS 59 | EN-Filled collective fall arrest systems-AMD 15221:August 20 2004 | |
| BSI PAS 61 | EN-Determination of priority pollutants in surface water using passive sampling-First Edition | |
| BSI PD 12349 | EN-Mechanical Vibration - Guide to the Health Effects of Vibration on the Human Body | |
| BSI PD 13846 | EN-Recommendations to Preserve and Extend Sludge Utilization and Disposal Routes-CORR 10986; June 2000; CR 13846: 2000; | |
| BSI PD 6504 | EN-Medical Information on Human Reaction to Skin Contact with Hot Surfaces | |
| BSI PD 6519-2 | EN-Guide to Effects of Current on Human Beings and Livestock Part 2: Special Aspects Relating to Human Beings (AMD 8649) June 15 1995 (IEC 479-2: 1987) (N)-Amd 1; | |
| BSI PD 6519-3 | EN-Guide to Effects of Current on Human Beings and Livestock - Part 3: Effects of Currents Passing Through the Body of Livestock-IEC 60479-3: 1998; | |
| BSI PD 6540 | EN-Dental Implants - Guidelines for Developing Dental Implants | |
| BSI PD 6545 | EN-Intended use of human head and ear simulators Guide | |
| BSI PD 6573 | EN-Fundamental Aspects of Safety Standards for Medical Electrical Equipment |