BSI - Electronics and Aerospace - Historical Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN 61000-4-5 | EN-Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 5: Surge Immunity Test-IEC 1000-4-5: 1995; | |
| BSI BS EN 61000-4-5 | EN-Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test-AMD 13146: September 2001; IEC 61000-4-5: 1995; (To be withdrawn October 1 2009) | |
| BSI BS EN 61000-4-6 | EN-Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 6: Immunity to Conducted Disturbances Induced by Radio-Frequency Fields-AMD 9500: May 1997; IEC 1000-4-6: 1996; | |
| BSI BS EN 61000-4-6 | EN-Electromagnetic Compatibility (EMC) - Part 4-6: Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-Frequency Fields-CORR 13608: December 18 2001; IEC 1000-4-6: 1996; | |
| BSI BS EN 61000-4-6 | EN-Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 6: Immunity to Conducted Disturbances Induced by Radio-Frequency Fields-IEC 1000-4-6: 1996; | |
| BSI BS EN 61000-4-6 | EN-Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances induced by radio-frequency fields-AMD 9500:May 1997; AMD 13165:October 112001; CORR 13608:Decemb | |
| BSI BS EN 61000-4-6 | EN-Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields | |
| BSI BS EN 61000-4-7 | EN-Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 7: General Guide on Harmonics and Interharmonics Measurements and Instrumentation for Power Supply Systems and Equipment Connect | |
| BSI BS EN 61000-4-7 | EN-Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 7: General Guide on Harmonics and Interharmonics Measurements and Instrumentation for Power Supply Systems and Equipment Connect | |
| BSI BS EN 61000-4-7 | EN-Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipment connected ther | |
| BSI BS EN 61000-4-7 | EN-Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipment connected ther | |
| BSI BS EN 61000-4-8 | EN-Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques - Section 8: Power Frequency Magnetic Field Immunity Test - Basic EMC Publication-IEC 61000-4-8: 1993; | |
| BSI BS EN 61000-4-9 | EN-Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 9: Pulse Magnetic Field Immunity Test - Basic EMC Publication-IEC 1000-4-9: 1993; | |
| BSI BS EN 61000-6-1 | EN-Electromagnetic Compatibility (EMC) - Part 6-1: Generic Standards - Immunity for Residential Commercial and Light-Industrial Environments-AMD 16356: June 30 2006;:1998 | |
| BSI BS EN 61000-6-1 | EN-Electromagnetic Compatibility (EMC) - Part 6-1: Generic Standards - Immunity for Residential Commercial and Light-Industrial Environments-Supersedes BS EN 50082-1:1998 Which Will Remain Current; IEC 61000-6-1:1997; | |
| BSI BS EN 61000-6-2 | EN-Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments-CORR 16351: September 29 2006 | |
| BSI BS EN 61000-6-2 | EN-Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards - Immunity for Industrial Environments-Supersedes BS EN 61000-6-2:1999; IEC 61000-6-2:1999 | |
| BSI BS EN 61000-6-2 | EN-Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards - Immunity for Industrial Environments-Supersedes BS EN 50082-2:1995; Superseded by BS EN 61000-6-2:2001 But This Will Remain Current; | |
| BSI BS EN 61000-6-3 | EN-Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential commercial and light-industrial environments-AMD 15429:November 12 2004; CORR 15540:March 1 2005; Supersedes BS E | |
| BSI BS EN 61000-6-3 | EN-Electromagnetic Compatibility (EMC) - Part 6-3: Generic Standards - Emission Standard for Residential Commercial and light-Industrial Environments-Supersedes BS EN 50081-1:1992 But Will Remain Current | |
| BSI BS EN 61000-6-4 | EN-Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments | |
| BSI BS EN 61010-1 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 1: General Requirements (AMD 8961) December 15 1995 (S)-Amd 1; | |
| BSI BS EN 61010-1 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 1: General Requirements-Replaces BS 4743: 1979; Read in Conjunction with BS EN 61010-2-010: 1995; and BS EN 61010-2-043: | |
| BSI BS EN 61010-2-010 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 2-010. Particular requirements for laboratory equipment for the heating of materials-AMD 8447: March 1995 | |
| BSI BS EN 61010-2-010 | EN-Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials-AMD 9300; February 1997 | |
| BSI BS EN 61010-2-020 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges-AMD 9301 March 1997; Supersedes BS 4402: 1982 | |
| BSI BS EN 61010-2-020 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges-Includes Amendment No.1; AMD 8440; February 15 1995; IEC 1010- | |
| BSI BS EN 61010-2-032 | EN-Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-032: Particular requirements for hand-held current clamps for electrical measurement and test | |
| BSI BS EN 61010-2-041 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Proc | |
| BSI BS EN 61010-2-042 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-042: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials and | |
| BSI BS EN 61010-2-043 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-043: Particular Requirements for Dry Heat Sterilizers Using Either Hot Air or Hot Inert Gas for the Treatment of Medical | |
| BSI BS EN 61010-2-051 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-051: Particular Requirements for Laboratory Equipment for Mechanical Mixing and Stirring (IEC 1010-2-051: 1995) (S) | |
| BSI BS EN 61010-2-061 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization (IEC 1010-2- 0 | |
| BSI BS EN 61010-2-081 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use - Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes | |
| BSI BS EN 61028 | EN-Electrical Measuring Instruments - X-Y Recorders-AMD 7714: May 1993; AMD 8968; December 1995 | |
| BSI BS EN 61037 | EN-Electricity Metering - Tariff and Load Control - Particular Requirements for Electronic Ripple Control Receivers-AMD 10354: July 1999; Renumbers BS 7401: 1990; Superseded by BS EN 62054-11:2004 | |
| BSI BS EN 61037 | EN-Electronic Ripple Control Receivers for Tariff and Load Control-AMD 9355: March 1997; Renumbers BS 7401: 1990; | |
| BSI BS EN 61054 | EN-Helical-scan video tape cassette system using 1265 mm(05 in) magnetic tape on type VHS - FM audio recording-AMD 7737: April 1993 | |
| BSI BS EN 61071-1 | EN-Power Electronic Capacitors Part 1: General | |
| BSI BS EN 61071-2 | EN-Power Electronic Capacitors Part 2: Requirements for Disconnecting Test on Fuses Destruction Test Self Healing Test and Endurance Test (IEC 1071-2: 1994) (S) | |
| BSI BS EN 61073-1 | EN-Mechanical Splices and Fusion Splice Protectors for Optical Fibres and Cables - Part 1: Generic Specification | |
| BSI BS EN 61076-4-101 | EN-Connectors with Assessed Quality for Use in d.c. Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 101: Detail Specification for Two-Part Connector Modu | |
| BSI BS EN 61083-1 | EN-Digital recorders for measurements in high-voltage impulse tests - Part 1: Requirements for digital recorders-AMD 7925: September 1993 | |
| BSI BS EN 61086-1 | EN-Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 1: Definitions Classification and General Requirements (IEC 1086-1: 1992) (S) | |
| BSI BS EN 61086-2 | EN-Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test | |
| BSI BS EN 61086-2 | EN-Specification for Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test | |
| BSI BS EN 61086-3-1 | EN-Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials Coatings for general purpose (Class 1) high reliability (class 2) and aerospace (Class 3) | |
| BSI BS EN 61094-1 | EN-Measurement Microphones Part 1: Specifications for Laboratory Standard Microphones (IEC 1094-1: 1992) (S) | |
| BSI BS EN 61094-2 | EN-Measurement Microphones Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique (IEC 1094-2: 1992) (S) | |
| BSI BS EN 61096 | EN-Methods of Measuring the Characteristics of Reproducing Equipment for Digital Audio Compact Discs-IEC 1096: 1992; | |
| BSI BS EN 61101 | EN-Absolute Calibration of Hydrophones Using the Planar Scanning Technique in the Frequency Range 0.5 MHz to 15 MHz (IEC 1101: 1991) (S) | |
| BSI BS EN 61107 | EN-Data Exchange for Meter Reading Tariff and Load Control - Direct Local Data Exchange-IEC 1107: 1992; Superseded by BS EN 62056-21: 2002; | |
| BSI BS EN 61107 | EN-Data Exchange for Meter Reading Tariff and Load Control - Direct Local Data Exchange-IEC 1107: 1996; Superseded by BS EN 62056-21: 2002; | |
| BSI BS EN 61114-1 | EN-Methods of Measurement on Receiving Antennas for Satellite Broadcast Transmissions in the 12 GHz Band Part 1: Electrical Measurements on DBS Receiving Antennas (IEC 1114-1: 1992) (S) | |
| BSI BS EN 61131-1 | EN-Programmable Controllers Part 1: General Information-IEC 1131-1: 1992; | |
| BSI BS EN 61131-2 | EN-Programmable controllers Part 2: Equipment requirements and tests-AMD 15180:June 24 2004 | |
| BSI BS EN 61131-2 | EN-Programmable Controllers Part 2: Equipment Requirements and Tests (IEC 1131-2: 1992) (S) | |
| BSI BS EN 61131-2 | EN-Programmable Controllers - Part 2: Equipment Requirements and Tests | |
| BSI BS EN 61131-3 | EN-Programmable Controllers Part 3: Programming Languages (IEC 1131-3: 1993) (S) | |
| BSI BS EN 61142 | EN-Data Exchange for Meter Reading Tariff and Load Control - Local Bus Data Exchange (IEC 1142: 1993) (S) | |
| BSI BS EN 61158-3 | EN-Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 3: Data link service definition-Remains Current | |
| BSI BS EN 61158-4 | EN-Digital data communication for measurement and control Fieldbus for use in industrial control systems Part 4: Data link protocol specification | |
| BSI BS EN 61158-5 | EN-Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 5: Application layer service definition | |
| BSI BS EN 61169-2 | EN-Radio Frequency Connectors - Part 2: Sectional Specification - Radio Frequency Coaxial Connectors of Type 952-IEC 61169-2:2001; | |
| BSI BS EN 61169-31 | EN-Radio-Frequency Connectors Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1 mm (0 39in) with Screw Coupling - Characteristic Impedance 50 ohms (Type 1 )-IEC 1169-31: 1999; | |
| BSI BS EN 61169-32 | EN-Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 185 mm (0 72 in) with Screw Coupling - Characteristic Impedance 50 ohms (Type 185)-IEC 61169-32:1999 | |
| BSI BS EN 61175 | EN-Designations for Signals and Connections | |
| BSI BS EN 61175 | EN-Designations for Signals and Connections (IEC 1175: 1993) (S) | |
| BSI BS EN 61182-7 | EN-(FAULTY STANDARD) 1996 Printed Boards - Electronic Data Description and Transfer Part 7: Bare Board Electric Test Information in Digital Form (IEC 1182-7: 1995) (S) | |
| BSI BS EN 61185 | EN-Magnetic Oxide Cores (ETD-Cores) Intended for Use in Power Supply Applications - Dimensions-IEC 61185: 1992 | |
| BSI BS EN 61196-2 | EN-Radio-Frequency Cables - Specifications Part 2: Semi-Rigid Radio-Frequency and Coaxial Cables with Polytetrafluoroethylene (PTFE) Insulation - Sectional Specification-IEC 1196-2: 1993; | |
| BSI BS EN 61202-1 | EN-Fibre Optic Isolators - Part 1: Generic Specification-IEC 61202-1:2000; | |
| BSI BS EN 61204-3 | EN-Low Voltage Power Supplies D.C. Output - Part 3: Electromagnetic Compatibility (EMC)-IEC 61204-3:2000; | |
| BSI BS EN 61215 | EN-Crystalline Silicon Terrestrial Photovoltaic (PV) Modules Design Qualification and Type Approval (IEC 1215: 1993) (S) | |
| BSI BS EN 61249-2-10 | EN-Materials for printed boards and other interconnecting structures Part 2-10: Reinforced base materials clad and unclad Cyanate ester brominated epoxide modified or unmodified woven E-glass reinforced laminated s | |
| BSI BS EN 61249-2-11 | EN-Materials for printed boards and other interconnecting structures Part 2-11: Reinforced base materials clad and unclad Polyimide brominated epoxide modified or unmodified woven E-glass reinforced laminated sheet | |
| BSI BS EN 61249-2-5 | EN-Materials for printed boards and other interconnecting structures Part 2-5: Reinforced base materials clad and unclad Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated | |
| BSI BS EN 61249-2-6 | EN-Materials for printed boards and other interconnecting structures Part 2-6: Reinforced base materials clad and unclad Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability | |
| BSI BS EN 61249-2-7 | EN-Materials for Printed Boards and Other Interconnecting Structures Part 2-7: Reinforced Base Materials Clad and Unclad Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test) Copper-Cl |