BSI - Civil Engineering and Building Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN ISO 15927-5 | EN-Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating | |
| BSI BS EN ISO 1716 | EN-Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) | |
| BSI BS EN ISO 1806 | EN-Fishing nets - Determination of mesh breaking force of netting | |
| BSI BS EN ISO 18233 | EN-Acoustics Application of new measurement methods in building and room acoustics | |
| BSI BS EN ISO 19432 | EN-Building construction machinery and equipment - Portable hand-held internal combustion engine driven cut-off machines - Safety requirements and testing | |
| BSI BS EN ISO 21003-1 | EN-Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General | |
| BSI BS EN ISO 21003-2 | EN-Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes | |
| BSI BS EN ISO 21003-3 | EN-Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings | |
| BSI BS EN ISO 21003-5 | EN-Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system | |
| BSI BS EN ISO 21549-2 | EN-Health informatics Patient healthcard data Part 2: Common objects | |
| BSI BS EN ISO 22475-1 | EN-Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution-Reprint: July 2007 | |
| BSI BS EN ISO 22476-12 | EN-Geotechnical investigation and testing - Field testing Part 12: Mechanical cone penetration test (CPTM) | |
| BSI BS EN ISO 22476-2 | EN-Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing-CORR 16932: February 28 2007 | |
| BSI BS EN ISO 22476-3 | EN-Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test-CORR 16931: February 28 2007 | |
| BSI BS EN ISO 24978 | EN-Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures | |
| BSI BS EN ISO 3382 | EN-Acoustics - Measurement of the Reverberation Time of Rooms with Reference to Other Acoustical Parameters-Supersedes BS 5363:1976 | |
| BSI BS EN ISO 3382-1 | EN-Acoustics - Measurement of room acoustic parameters Part 1: Performance spaces | |
| BSI BS EN ISO 3382-2 | EN-Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms-CORR: August 31 2009 | |
| BSI BS EN ISO 3411 | EN-Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope | |
| BSI BS EN ISO 354 | EN-Acoustics Measurement of sound absorption in a reverberation room-CORR 14766: October 23 2003; Supersedes BS EN 20354:1993; | |
| BSI BS EN ISO 3822-2 | EN-Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations Part 2: Mounting and Operating Conditions for Draw-off Taps and Mixing Valves (R) | |
| BSI BS EN ISO 3822-4 | EN-Acoustics - Laboratory Tests on Noise Emission from Appliances and Equipment Used in Water Supply Installations Part 4: Mounting and Operating Conditions for Special Appliances-Supersedes BS 6864: Part 4 : 1987; | |
| BSI BS EN ISO 389-3 | EN-Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 3: Reference Equivalent Threshold Force Levels for Pure Tones and Bone Vibrators-AMD 10483: August 1999 | |
| BSI BS EN ISO 5353 | EN-Corr.1 Earth-Moving Machinery and Tractors and Machinery for Agriculture and Forestry - Seat Index Point-CORR 10427; February 15 1999; Also Known as BS 6912-27:1998; Supersedes BS 5631: 1978 | |
| BSI BS EN ISO 6946 | EN-Building components and building elements - Thermal resistance and thermal transmittance - Calculation method-AMD 14547: August 28 2003; | |
| BSI BS EN ISO 717-1 | EN-Acoustics - Rating of Sound Insulation in Buildings and of Building Elements Part 1: Airborne Sound Insulation-AMD 16718:10/31/2006; Supersedes BS 5821: Part 1: 1984; | |
| BSI BS EN ISO 717-2 | EN-Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation-AMD 16719: October 31 2006;:1984 | |
| BSI BS EN ISO 7235 | EN-Acoustics - Laboratory measurement procedures for ducted silencers and airterminal units - Insertion loss flow noise and total pressure loss | |
| BSI BS EN ISO 7389 | EN-Building construction Jointing products Determination of elastic recovery of sealants-Supersedes BS EN 27389:1991; | |
| BSI BS EN ISO 7390 | EN-Building construction - Jointing products - Determination of resistance to flow of sealants | |
| BSI BS EN ISO 8339 | EN-Building construction Sealants Determination of tensile properties (Extension to break) | |
| BSI BS EN ISO 8340 | EN-Building construction Sealants Determination of tensile properties at maintained extension-Supersedes BS EN 28340: 1991 | |
| BSI BS EN ISO 8497 | EN-Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes | |
| BSI BS EN ISO 9046 | EN-Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature | |
| BSI BS EN ISO 9047 | EN-Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures-CORR: August 31 2009 | |
| BSI BS EN ISO 9239-1 | EN-Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source | |
| BSI BS ISO 10295-1 | EN-Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals | |
| BSI BS ISO 10425 | EN-Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance | |
| BSI BS ISO 10426-3 | EN-Petroleum and natural gas industries Cements and materials for well cementing Part 3: Testing of deepwater well cement formulations-Renumbered as BS EN ISO 10426-3:2004 | |
| BSI BS ISO 10563 | EN-Building Construction - Sealants for Joints - Determination of Change in Mass and Volume-Renumbered as BS EN ISO 10563:1995 | |
| BSI BS ISO 10590 | EN-Building Construction - Sealants - Determination of Adhesion/Cohesion Properties at Maintained Extension After Immersion in Water-Renumbered as BS EN ISO 10590:1995 | |
| BSI BS ISO 10591 | EN-Building Construction - Sealants - Determination of Adhesion/Cohesion Properties After Immersion in Water-Renumbered as BS EN ISO 10591: 1995 | |
| BSI BS ISO 10840 | EN-Plastics - Guidance for the use of standard fire tests | |
| BSI BS ISO 1100-2 | EN-Measurement of liquid flow in open channels - Part 2: Determination of the stage-discharge relation-CORR 17462: October 31 2007 | |
| BSI BS ISO 11432 | EN-Building Construction - Sealants - Determination of Resistance to Compression-Renumbered as BS EN ISO 11432:1995 | |
| BSI BS ISO 11561 | EN-Ageing of Thermal Insulation Materials - Determination of the Long-Term Change in Thermal Resistance of Closed-Cell Plastics (Accelerated Laboratory Test Methods) | |
| BSI BS ISO 12006-2 | EN-Building Construction - Organization of Information About Construction Works - Part 2: Framework for Classification of Information | |
| BSI BS ISO 12006-3 | EN-Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information | |
| BSI BS ISO 12472 | EN-Fire resistance of timber door assemblies Method of determining the efficacy of intumescent seals | |
| BSI BS ISO 12575-2 | EN-Thermal insulation products - Exterior insulating systems for foundations Part 2: Principal responsibilities of installers | |
| BSI BS ISO 12576-2 | EN-Thermal insulation products - Conformity control systems Part 2: In-situ products | |
| BSI BS ISO 13229 | EN-Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value | |
| BSI BS ISO 13254 | EN-Thermoplastics piping systems for non-pressure applications - Test method for watertightness | |
| BSI BS ISO 13255 | EN-Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints | |
| BSI BS ISO 13259 | EN-Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints | |
| BSI BS ISO 13263 | EN-Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength | |
| BSI BS ISO 13265 | EN-Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals | |
| BSI BS ISO 13267 | EN-Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance | |
| BSI BS ISO 13472-1 | EN-Acoustics - Measurement of Sound Absorption Properties of Road Surfaces In Situ - Part 1: Extended Surface Method | |
| BSI BS ISO 13473-2 | EN-Characterization of pavement texture by use of surface profiles Part 2: Terminology and basic requirements related to pavement texture profile analysis | |
| BSI BS ISO 13473-3 | EN-Characterization of pavement texture by use of surface profiles Part 3: Specification and classification of profilometers | |
| BSI BS ISO 13640 | EN-Building Construction - Jointing Products - Specifications for Test Substrates | |
| BSI BS ISO 13765-1 | EN-Refractory mortars Part 1: Determination of consistency using the penetrating cone method-Together with BS ISO 13765-2 thru -6:1991 | |
| BSI BS ISO 13765-2 | EN-Refractory mortars Part 2: Determination of consistency using the reciprocating flow table method-Together with BS ISO 13765-1 and -3 thru -6:1991 | |
| BSI BS ISO 13765-4 | EN-Refractory mortars Part 4: Determination of flexural bonding strength-Together with BS ISO 13765-1 thru -3 -5 and -6:1991 | |
| BSI BS ISO 13765-5 | EN-Refractory mortars Part 5: Determination of grain size distribution (sieve analysis)-Together with BS ISO 13765-1 thru -4 and -6:1991 | |
| BSI BS ISO 13765-6 | EN-Refractory mortars Part 6: Determination of moisture content of ready-mixed mortars-Together with BS ISO 13765-1 thru -5:1991 | |
| BSI BS ISO 14654 | EN-Epoxy-Coated Steel for the Reinforcement of Concrete | |
| BSI BS ISO 14656 | EN-Epoxy Powder and Sealing Material for the Coating of Steel for the Reinforcement of Concrete | |
| BSI BS ISO 14798 | EN-Lifts (elevators) escalators and moving walks - Risk assessment and reduction methodology | |
| BSI BS ISO 14963 | EN-Mechanical vibration and shock Guidelines for dynamic tests and investigations on bridges and viaducts | |
| BSI BS ISO 15186-1 | EN-Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Using Sound Intensity - Part 1: Laboratory Conditions-Renumbered by BS EN ISO 15186-1; | |
| BSI BS ISO 15186-2 | EN-Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements | |
| BSI BS ISO 15186-3 | EN-Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies | |
| BSI BS ISO 15371 | EN-Ships and marine technology - Fire-extinguishing systems for protection of galley cooking equipment | |
| BSI BS ISO 15392 | EN-Sustainability in building construction - General Principles | |
| BSI BS ISO 15643 | EN-Road Construction and Maintenance Equipment Bituminous Binder Spreaders/Sprayers Terminology and Commercial Specifications | |
| BSI BS ISO 15644 | EN-Road Construction and Maintenance Equipment Chippings Spreaders Terminology and Commercial Specifications | |
| BSI BS ISO 15645 | EN-Road Construction and Maintenance Equipment Road Milling Machinery Terminology and Commercial Specifications |