BSI - Civil Engineering and Building Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN 777-3 | EN-Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 3: System F - Safety | |
| BSI BS EN 777-4 | EN-Multi-burner gas-fired overhead radiant tube heater systems for nondomestic use Part 4: System H - Safety | |
| BSI BS EN 80 | EN-Wall-Hung Urinals - Connecting Dimensions | |
| BSI BS EN 805 | EN-Water Supply - Requirements for Systems and Components Outside Buildings | |
| BSI BS EN 806-1 | EN-Installations Inside Buildings Conveying Water for Human Consumption - Part 1: General-AMD 13472: January 17 2002; | |
| BSI BS EN 806-2 | EN-Specification for installations inside buildings conveying water for human consumption - Part 2: Design-Partially Supersedes BS 6700:1997 | |
| BSI BS EN 806-3 | EN-Specifications for installations inside buildings conveying water for human consumption Part 3: Pipe sizing Simplified method | |
| BSI BS EN 806-4 | EN-Specifications for installations inside buildings conveying water for human consumption Part 4: Installation | |
| BSI BS EN 81-1 | EN-Safety rules for the construction and installation of lifts - Part 1: Electric lifts-CORR 10809: March 2000; AMD 15794: March 2006; Remains current | |
| BSI BS EN 81-1 + A3 | EN-Safety rules for the construction and installation of lifts - Part 1: Electric lifts-CORR 10809: March 2000; AMD 15794: March 2006; AMD: March 31 2010 | |
| BSI BS EN 81-2 | EN-Safety Rules for the Construction and Installation of Lifts - Part 2: Hydraulic Lifts-AMD 15795: March 2006; CORR 10810: March 2000;: 1988; Remains Current | |
| BSI BS EN 81-2 + A3 | EN-Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts-CORR 10810: March 2000; AMD 15795: March 2006; AMD: March 31 2010 | |
| BSI BS EN 81-21 | EN-Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods Part 21: New passenger and goods passenger lifts in existing building | |
| BSI BS EN 81-28 | EN-Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 28: Remote alarm on passenger and goods passenger lifts | |
| BSI BS EN 81-3 + A1 | EN-Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts-AMD: April 30 2009; CORR: March 31 2010 | |
| BSI BS EN 81-31 | EN-Safety rules for the construction and installation of lifts - Lifts for the transport of goods only Part 31: Accessible goods only lifts | |
| BSI BS EN 81-58 | EN-Safety rules for the construction and installation of lifts Examination and tests Part 58: Landing doors fire resistance test | |
| BSI BS EN 81-70 | EN-Safety rules for the construction and installations of lifts Particular applications for passenger and good passengers lifts Part 70: Accessibility to lifts for persons including persons with disability-CORR 14751: | |
| BSI BS EN 81-71 | EN-Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts-AMD 16922: February 28 2007 | |
| BSI BS EN 81-72 | EN-Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts Part 72: Firefighters lifts | |
| BSI BS EN 81-73 | EN-Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts Part 73: Behaviour of lifts in the event of fire | |
| BSI BS EN 81-80 | EN-Safety rules for the construction and installation of lifts Existing lifts Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts | |
| BSI BS EN 815 + A2 | EN-Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock-AMD 17029: April 30 2007; AMD: July 31 2009 | |
| BSI BS EN 816 | EN-Sanitary Tapware - Automatic Shut-Off Valves PN 10 | |
| BSI BS EN 817 | EN-Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications-CORR: January 31 2009 | |
| BSI BS EN 822 | EN-Thermal Insulating Products for Building Applications - Determination of Length and Width (F) | |
| BSI BS EN 823 | EN-Thermal Insulating Products for Building Applications - Determination of Thickness (F) | |
| BSI BS EN 824 | EN-Thermal Insulating Products for Building Applications - Determination of Squareness (F) | |
| BSI BS EN 825 | EN-Thermal Insulating Products for Building Applications - Determination of Flatness (F) | |
| BSI BS EN 826 | EN-Thermal Insulating Products for Building Applications - Determination of Compression Behaviour | |
| BSI BS EN 835 | EN-Heat Cost Allocators for the Determination of the Consumption of Room Heating Radiators - Appliances without an Electrical Energy Supply Based on the Evaporation Principle (R) | |
| BSI BS EN 845-1 + A1 | EN-Specification for ancillary components for masonry - Part 1: Ties tension straps hangers and brackets-CORR 14736: October 1 2003; AMD 15539: September 29 2006; AMD: May 31 2009; CORR: October 31 2009 | |
| BSI BS EN 845-2 | EN-Specification for ancillary components for masonry Part 2: Lintels | |
| BSI BS EN 845-3 + A1 | EN-Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork-AMD: May 31 2009 | |
| BSI BS EN 846-10 | EN-Methods of Test for Ancillary Components for Masonry - Part 10: Determination of Load Capacity and Load Deflection Characteristics of Brackets | |
| BSI BS EN 846-11 | EN-Methods of Test for Ancillary Components for Masonry - Part 11: Determination of Dimension and Bow of Lintels | |
| BSI BS EN 846-13 | EN-Methods of Test for Ancillary Components for Masonry - Part 13: Determination of Resistance to Impact Abrasion and Corrosion of Organic Coatings | |
| BSI BS EN 846-2 | EN-Methods of Test for Ancillary Components for Masonry - Part 2: Determination of Bond Strength of Prefabricated Bed Joint Reinforcement in Mortar Joints | |
| BSI BS EN 846-3 | EN-Methods of Test for Ancillary Components for Masonry - Part 3: Determination of Shear Load Capacity of Welds in Prefabricated Bed Joint Reinforcement | |
| BSI BS EN 846-4 | EN-Methods of test for ancillary components for masonry Part 4: Determination of load capacity and load-deflection characteristics of straps-AMD 15526:February 27 2005 | |
| BSI BS EN 846-5 | EN-Methods of Test for Ancillary Components for Masonry - Part 5: Determination of Tensile and Compressive Load Capacity and Load Displacement Characteristics of Wall Ties (Couplet Test) | |
| BSI BS EN 846-6 | EN-Methods of Test for Ancillary Components for Masonry - Part 6: Determination of Tensile and Compressive Load Capacity and Load and Load Displacement Characteristics of Wall Ties (Single End Test) | |
| BSI BS EN 846-7 | EN-Methods of Test for Ancillary Components for Masonry - Part 7: Determination of Shear Load Capacity and Load Displacement Characteristics of Shear Ties and Slip Ties (Couplet Test for Mortar Joint Connection) | |
| BSI BS EN 846-8 | EN-Methods of Test for Ancillary Components for Masonry - Part 8: Determination of Load Capacity and Load-Deflection Characteristics of Joist Hangers-CORR 11024: July 2000; AMD 16753: November 30 2006 | |
| BSI BS EN 846-9 | EN-Methods of Test for Ancillary Components for Masonry - Part 9: Determination of Flexural Resistance and Shear Resistance of Lintels | |
| BSI BS EN 912 | EN-Timber Fasteners - Specifications for Connectors for Timber-CORR 13088: June 2001; Supersedes BS 1579:1960; | |
| BSI BS EN 932-1 | EN-Tests for General Properties of Aggregates Part 1: Methods for Sampling | |
| BSI BS EN 932-2 | EN-Tests for General Properties of Aggregates - Part 2: Methods for Reducing Laboratory Samples | |
| BSI BS EN 932-3 | EN-Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description-AMD 14865: February 26 2004 | |
| BSI BS EN 932-5 | EN-Tests for General Properties of Aggregates - Part 5: Common Equipment and Calibration | |
| BSI BS EN 932-6 | EN-Tests for General Properties of Aggregates - Part 6: Definitions of Repeatability and Reproducibility-Supersedes BS 812-101: 1984; | |
| BSI BS EN 933-1 | EN-Tests for Geometrical Properties of Aggregates Part 1: Determination of Particle Size Distribution - Sieving Method-AMD 15907: March 2006 | |
| BSI BS EN 933-10 | EN-Tests for geometrical properties of aggregates Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) | |
| BSI BS EN 933-11 | EN-Tests for geometrical properties of aggregates Part 11: Classification test for the constituents of coarse recycled aggregate-CORR: February 28 2010 | |
| BSI BS EN 933-2 | EN-Tests for Geometrical Properties of Aggregates Part 2: Determination of Particle Size Distribution - Test Sieves Nominal Size of Apertures (R) | |
| BSI BS EN 933-3 | EN-Tests for Geometrical Properties of Aggregates - Part 3: Determination of Particle Shape - Flakiness Index-AMD 14866: February 26 2004 | |
| BSI BS EN 933-4 | EN-Tests for geometrical properties of aggregates Part 4: Determination of particle shape - Shape index | |
| BSI BS EN 933-6 | EN-Tests for geometrical properties of aggregates Part 6: Assessment of surface characteristics Flow coefficient of aggregates-CORR 15318:August 18 2004 | |
| BSI BS EN 933-7 | EN-Tests for Geometrical Properties of Aggregates - Part 7: Determination of Shell Content - Percentage of Shells in Coarse Aggregates-Supersedes BS 812-106: 1985; | |
| BSI BS EN 933-8 | EN-Tests for Geometrical Properties of Aggregates - Part 8: Assessment of Fines - Sand Equivalent Test | |
| BSI BS EN 933-9 | EN-Tests for geometrical properties of aggregates Part 9: Assessment of fines - Methylene blue test | |
| BSI BS EN 934-1 | EN-Admixtures for concrete mortar and grout - Part 1: Common requirements | |
| BSI BS EN 934-3 | EN-Admixtures for concrete mortar and grout Part 3: Admixtures for masonry mortar - Definitions requirements conformity and marking and labelling | |
| BSI BS EN 934-4 | EN-Admixtures for concrete mortar and grout Part 4: Admixtures for grout for prestressing tendons - Definitions requirements conformity marking and labelling | |
| BSI BS EN 934-5 | EN-Admixtures for concrete mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions requirements conformity marking and labelling | |
| BSI BS EN 934-6 | EN-Admixtures for Concrete Mortar and Grout - Part 6: Sampling Conformity Control and Evaluation of Conformity-CORR 13534: October 19 2001; AMD 16058: March 2006 | |
| BSI BS EN 947 | EN-Hinged or Pivoted Doors - Determination of the Resistance to Vertical Load | |
| BSI BS EN 948 | EN-Hinged or Pivoted Doors - Determination of the Resistance to Static Torsion | |
| BSI BS EN 949 | EN-Windows and Curtain Walling Doors Blinds and Shutters - Determination of the Resistance to Soft and Heavy Body Impact for Doors | |
| BSI BS EN 950 | EN-Door Leaves - Determination of the Resistance to Hard Body Impact | |
| BSI BS EN 951 | EN-Door Leaves - Method for Measurement of Height Width Thickness and Squareness | |
| BSI BS EN 952 | EN-Door Leaves - General and Local Flatness - Measurement Method | |
| BSI BS EN 989 | EN-Determination of the Bond Behaviour Between Reinforcing Bars and Autoclaved Aerated Concrete by the "Push-Out" Test (R) | |
| BSI BS EN 990 | EN-Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure | |
| BSI BS EN 991 | EN-Determination of the Dimensions of Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure (R) | |
| BSI BS EN 992 | EN-Determination of the Dry Density of Lightweight Aggregate Concrete with Open Structure (R) | |
| BSI BS EN 996 + A3 | EN-Piling equipment - Safety requirements-AMD 10438: July 1999; AMD 14688: December 2 2003; AMD: June 30 2009 | |
| BSI BS EN 997 | EN-WC pans and WC suites with integral trap-CORR 14805: October 13 2003; AMD 16965: February 28 2007 | |
| BSI BS EN 998-1 | EN-Specification for mortar for masonry - Part 1: Rendering and plastering mortar-CORR 16341: April 28 2006 |