BSI - Civil Engineering and Building Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 4315-2 | EN-Methods of Test for Resistance to Air and Water Penetration - Part 2: Permeable Walling Constructions (Water Penetration)-AMD 4207: March 1983 | |
| BSI BS 434-1 | EN-Bitumen Road Emulsions (Anionic and Cationic) Part 1: Specification for Bitumen Road Emulsions (AMD 6376) June 28 1991-Amd 3; | |
| BSI BS 434-2 | EN-Bitumen road emulsions - Part 2: Code of practice for the use of cationic bitumen emulsions on roads and other paved areas | |
| BSI BS 4363 | EN-Distribution Assemblies for Reduced Low Voltage Electricity Supplies for Construction and Building Sites | |
| BSI BS 437 | EN-Specification for cast iron drain pipes fittings and their joints for socketed and socketless systems | |
| BSI BS 4428 | EN-Code of Practice for General Landscape Operations (Excluding Hard Surfaces) (AMD 6784) September 30 1991-Amd 1; | |
| BSI BS 4467 | EN-Guide to Dimensions in Designing for Elderly People | |
| BSI BS 4484-1 | EN-Specification for Measuring instruments for constructional works - Part 1: Metric graduation and figuring of instruments for linear measurement | |
| BSI BS 4485 PART 2 | EN-Water Cooling Towers - Part 2: Methods for Performance Testing | |
| BSI BS 4485-1 | EN-Water Cooling Towers Part 1: Glossary of Terms | |
| BSI BS 4485-3 | EN-Water Cooling Towers Part 3: Code of Practice for Thermal and Functional Design to BS 4485: Part 3: 1977) | |
| BSI BS 4485-4 | EN-Water Cooling Towers Part 4: Code of Practice for Structural Design and Construction (R) | |
| BSI BS 4486 | EN-Specification for Hot Rolled and Hot Rolled and Processed High Tensile Alloy Steel Bars for the Prestressing of Concrete-AMD 5885: July 29 1988 | |
| BSI BS 4508-1 | EN-Thermally Insulated Underground Pipelines Part 1: Specification for Steel Cased Systems with Air Gap (AMD 7727) July 15 1993 (R)-Amd 1; | |
| BSI BS 4508-4 | EN-Thermally Insulated Under Ground Piping Systems Part 4: Specific Testing and Inspection Requirements for Cased Systems Without Air Gap | |
| BSI BS 4513 | EN-Lead Bricks for Radiation Shielding | |
| BSI BS 4514 | EN-Unplasticized PVC Soil and Ventilating Pipes of 82.4 mm Minimum Mean Outside Diameter and Fittings and Accessories of 82.4 mm and of Other Sizes - Specification | |
| BSI BS 4550-0 | EN-Methods of Testing Cement Part 0: General Introduction | |
| BSI BS 4550-3.1 | EN-Methods of Testing Cement Part 3: Physical Tests Section 3.1: Introduction-Supersedes BS 12 Part 2: 1971; BS 146 Part 2: 1973: BS 1370 Part 2: 1974; BS 4027 Part 2: 1972; BS 4246 Part 2: 1974 and Partially Replaces B | |
| BSI BS 4550-3.4 | EN-Methods of Testing Cement Part 3: Physical Tests Section 3.4: Strength Test-AMD 5704; July 29 1988; Clause 1 is Superseded by BS 1881: Part 131: 1998; Replaces BS 12: Part 2: 1971 BS 146: Part 2: 1973 BS 1370: Par | |
| BSI BS 4550-3.8 | EN-Methods of testing cement - Part 3: Physical tests - Section 3.8 Test for heat of hydration | |
| BSI BS 4550-6 | EN-Methods of Testing Cement Part 6: Standard Sand for Mortar Cubes | |
| BSI BS 4551 + A1 | EN-Mortar - Methods of test for mortar - Chemical analysis and physical testing-AMD: January 31 2010 | |
| BSI BS 459 | EN-Specification for Matchboarded wooden door leaves for external use-AMD 8737: July 1995 | |
| BSI BS 4592-0 | EN-Industrial type flooring and stair treads - Part 0: Common design requirements and recommendations for installation | |
| BSI BS 4592-1 | EN-Industrial type flooring and stair treads - Part 1: Metal open bar gratings - Specification-CORR 1: January 31 2010 | |
| BSI BS 4592-2 | EN-Industrial type flooring and stair treads - Part 2: Expanded metal grating - Specification | |
| BSI BS 4592-3 | EN-Industrial type flooring and stair treads - Part 3: Cold formed metal planks - Specification | |
| BSI BS 4592-4 | EN-Industrial type flooring and stair treads - Part 4: Glass reinforced plastics (GRP) open bar gratings - Specification | |
| BSI BS 4592-5 | EN-Industrial type flooring and stair treads - Part 5: Solid plates in metal and glass reinforced plastics (GRP) - Specification | |
| BSI BS 4592-6 | EN-Industrial type flooring and stair treads - Part 6: Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers - Specification | |
| BSI BS 460 + A2 | EN-Cast iron rainwater goods - Specification-AMD 15095: November 29 2004; AMD 16890: July 31 2007; CORR 17425: September 28 2007; CORR: November 30 2009 | |
| BSI BS 4624 | EN-Methods of test for Asbestos-cement building products-AMD 4809: March 1985; AMD 7307: October 1992 | |
| BSI BS 4660 | EN-Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage-CORR 13946: December 9 2002; Partially superseded by BS EN 13598-1: 2003; | |
| BSI BS 4678-2 | EN-Cable Trunking Part 2: Steel Underfloor (Duct) Trunking-Amd 1; | |
| BSI BS 4678-4 | EN-Cable Trunking Part 4: Cable Trunking Made of Insulating Material-Amd 1; | |
| BSI BS 4729 | EN-Clay and calcium silicate bricks of special shapes and sizes Recommendations | |
| BSI BS 4737-3.0 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.0: General Requirements (To be Read in Conjuction with Appropriate Sections of BS 4737: Part 3) | |
| BSI BS 4737-3.1 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.1: Continuous Wiring | |
| BSI BS 4737-3.10 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.10: Vibration Detectors-Amd 1; | |
| BSI BS 4737-3.12 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.12: Beam Interruption Detectors-Amd 1; | |
| BSI BS 4737-3.13 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.13: Capacitive Proximity Detectors-Amd 1; | |
| BSI BS 4737-3.14 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.14: Deliberately-Operated Devices | |
| BSI BS 4737-3.2 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.2: Foil on Glass | |
| BSI BS 4737-3.3 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.3: Protective Switches | |
| BSI BS 4737-3.30 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.30: PVC Insulated Cables for Interconnecting Wiring | |
| BSI BS 4737-3.5 | EN-Specification for Intruder alarm systems in buildings - Part 3. Requirements for detection devices - Section 3.5 Ultrasonic movement detectors-AMD 3249: March 31 1980; AMD 3867: January 29 1982 | |
| BSI BS 4737-3.6 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.6: Acoustic Detectors-Amd 1; | |
| BSI BS 4737-3.8 | EN-Intruder Alarm Systems in Buildings Part 3: Requirements for Detection Devices Section 3.8: Volumetric Capacitive Detectors-Amd 1; | |
| BSI BS 4737-3.9 | EN-Intruder Alarm Systems in Buildings Part 3: Components Section 3.9: Pressure Mats-Amd 1; | |
| BSI BS 4737-4.3 | EN-Intruder Alarm Systems in Buildings Part 4: Codes of Practice Section 4.3: Code of Practice for Exterior Alarm Systems | |
| BSI BS 4737-5.2 | EN-Intruder Alarm Systems in Buildings Part 5: Terms and Symbols Section 5.2: Recommendations for Symbols for Diagrams | |
| BSI BS 476-10 | EN-Fire tests on building materials and structures - Part 10: Guide to the principles selection role and application of fire testing and their outputs | |
| BSI BS 476-11 | EN-Fire tests on building materials and structures - Part 11: Method for assessing the heat emission from building materials | |
| BSI BS 476-12 | EN-Fire tests on building materials and structures - Part 12: Method of test for ignitability of products by direct flame impingement | |
| BSI BS 476-13 | EN-Fire Tests on Building Materials and Structures Part 13: Method of Measuring the Ignitability of Products Subjected to Thermal Irradiance-Amd 1; | |
| BSI BS 476-15 | EN-Fire Tests on Building Materials and Structures Part 15: Method of Measuring the Rate of Heat Release of Products (ISO 5660-1: 1993) (R) | |
| BSI BS 476-20 | EN-Fire Tests on Building Materials and Structures Part 20: Method for Determination of the Fire Resistance of Elements of Construction (General Principles)-AMD 6487; April 30 1990 | |
| BSI BS 476-21 | EN-Fire Tests on Building Materials and Structures Part 21: Methods for Determination of the Fire Resistance of Loadbearing Elements of Construction | |
| BSI BS 476-22 | EN-Fire Tests on Building Materials and Structures Part 22: Methods for Determination of the Fire Resistance of Non- Loadbearing Elements of Construction | |
| BSI BS 476-23 | EN-Fire Tests on Building Materials and Structures Part 23: Methods for Determination of the Contribution of Components to the Fire Resistance of a Structure-AMD 9458; January 1998; | |
| BSI BS 476-24 | EN-Fire Tests on Building Materials and Structures Part 24: Method for Determination of the Fire Resistance of Ventilation Ducts | |
| BSI BS 476-3 | EN-Fire tests on building materials and structures - Part 3: Classification and method of test for external fire exposure to roofs-AMD 16169: January 18 2006; AMD 16924: April 30 2007 | |
| BSI BS 476-31.1 | EN-Fire Tests on Building Materials and Structures Part 31: Methods for Measuring Smoke Penetration Through Doorsets and Shutter Assemblies Section 31.1: Method of Measurement Under Ambient Temperature Conditions (AMD 8 | |
| BSI BS 476-32 | EN-Fire tests on building materials and structures - Part 32: Guide to full scale fire tests within buildings | |
| BSI BS 476-33 | EN-Fire Tests on Building Materials and Structures Part 33: Full-Scale Room Test for Surface Products (ISO 9705: 1993) (R) | |
| BSI BS 476-4 | EN-Fire tests on building materials and structures - Part 4: Non-combustibility test for materials-AMD 2483: March 1978; AMD 4390: September 1983 | |
| BSI BS 476-6 + A1 | EN-Fire tests on building materials and structures - Part 6: Method of test for fire propagation for products-AMD: May 31 2009 | |
| BSI BS 476-7 | EN-Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products | |
| BSI BS 4787-1 | EN-Internal and external wood doorsets door leaves and frames - Part 1: Specification for dimensional requirements-AMD 4737: November 1984; AMD 8721: June 1995; AMD 8963: December 1995 | |
| BSI BS 4800 | EN-Paint Colours for Building Purposes *Includes color shade cards****See Global Engineering Documents (1-800-854-7179) to order your copy*** | |
| BSI BS 4834 | EN-Inset Open Fires Without Convection with or Without Boilers Burning Solid Mineral Fuels (AMD 6729) September 30 1991-Amd 1; | |
| BSI BS 4841-1 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 1: Specification for laminated insulation boards with autoadhesively or separately bonded facings | |
| BSI BS 4841-2 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 2: Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for inte | |
| BSI BS 4841-3 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Part 3: Specification for laminated boards (roofboards) with autoadhesively or separately bonded facings for use as roofb | |
| BSI BS 4841-4 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 4: Specification for laminated boards (roofboards) with autoadhesively or separately bonded facings for use as r | |
| BSI BS 4841-5 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 5: Specification for laminated boards (roofboards) with autoadhesively or separately bonded facings for use as t | |
| BSI BS 4841-6 | EN-Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 6: Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insul | |
| BSI BS 4842 | EN-Specification for Liquid organic coatings for application to aluminium alloy extrusions sheet and preformed sections for external architectural purposes and for the finish on aluminium alloy extrusions sheet and p |