BSI - British Standards Active Excludes Adoptions Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 3470 | EN-Specification for Field gates and posts | |
| BSI BS 3473-1 | EN-Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 1: Method for Determination of Resistance of Glass to Attack by a Boiling Aqueous Solution of Mixed Alkali | |
| BSI BS 3473-2 | EN-Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 2: Method for Determination of Hydrolytic Resistance of Glass Grains at 98 Degrees Centigrade | |
| BSI BS 3473-3 | EN-Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 3: Method for Determination of Hydrolytic Resistance of Glass Grains at 121 Degrees Centigrade | |
| BSI BS 3473-5 | EN-Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 5: Method for Determination of Resistance of Glass to Attack by 6 mol/L Hydrochloric Acid at 100 Degrees C | |
| BSI BS 3475 | EN-Specification for Bowl Stands for Use In Hospitals-AMD 4220: March 1983 | |
| BSI BS 3482-1 | EN-Methods of Test for Desiccants - Part 1: Sampling and Preparation and Storage of Test Samples | |
| BSI BS 3482-10 | EN-Methods of Test for Desiccants - Part 10: Determination of Bulk Density (Dry Basis) | |
| BSI BS 3482-11 | EN-Methods of Test for Desiccants - Part 11: Determination of Friability and Dust Content-AMD 8726: July 15 1995 | |
| BSI BS 3482-2 | EN-Methods of Test for Desiccants - Part 2: Determination of Moisture Content | |
| BSI BS 3482-3 | EN-Methods of Test for Desiccants - Part 3: Determination of pH | |
| BSI BS 3482-4 | EN-Methods of Test for Desiccants - Part 4: Determination of Water-Soluble Chlorides Content | |
| BSI BS 3482-5 | EN-Methods of test for Desiccants - Part 5: Determination of water-soluble sulphates content | |
| BSI BS 3482-6 | EN-Methods of Test for Desiccants - Part 6: Determination of Adsorptive Capacity | |
| BSI BS 3482-7 | EN-Methods of Test for Desiccants - Part 7: Determination of Particle Size | |
| BSI BS 3482-8 | EN-Methods of Test for Desiccants - Part 8: Estimation of Ammonia and Ammonium Compounds Content | |
| BSI BS 3482-9 | EN-Methods of Test for Desiccants - Part 9: Determination of Cobalt Chloride Content | |
| BSI BS 3483-0 | EN-Methods for Testing pigments for paints - Part 0: General introduction | |
| BSI BS 3483-A1 | EN-Methods for Testing Pigments in Paints Part A1: Comparison of Colour | |
| BSI BS 3483-A3 | EN-Methods of Testing Pigments in Paints Part A3: Comparison of Resistance to Light of Coloured Pigments of Similar Types to a Specified Light Source-Renumbered as BS EN ISO 787-15: 1995; | |
| BSI BS 3483-A4 | EN-Methods for Testing Pigments in Paints Part A4: Determination of the Relative Tinting Strength and Colour on Reduction of Coloured Pigments Using Visual Comparison-Renumbered as BS EN ISO 787-16; | |
| BSI BS 3483-A6 | EN-Methods for Testing Pigments in Paints Part A6: Determination of Relative Tinting Strength of Coloured Pigments and Relative Scattering Power of White Pigments Using a Photometer-Renumbered as BS EN ISO 787-24: 1995 | |
| BSI BS 3483-A7 | EN-Methods for Testing Pigments for Paints Part A7: Colorimetric Method for the Comparison of the Colours in Full-Shade Systems of White Black and Coloured Pigments-ISO 787-25: 1993; | |
| BSI BS 3483-B10 | EN-Methods for Testing Pigments in Paints Part B10: Determination of Tamped Volume and Apparent Density After Tamping-Renumbered as BS EN ISO 787-11: 1995 | |
| BSI BS 3483-B11 | EN-Methods for Testing Pigments for Paints Part B11: Determination of Solubility of Dyestuffs in Organic Solvents-Renumbered as BS EN ISO 7579: 1991 | |
| BSI BS 3483-B6 | EN-Methods for Testing Pigments for Paints Part B6: Determination of Matter Volatile at 105 Degrees C-Renumbered as BS EN ISO 787-2: 1995 | |
| BSI BS 3483-B7 | EN-Methods for Testing Pigments in Paints Part B7: Determination of Oil Absorption Value-Renumbered as BS EN ISO 787-5: 1995 | |
| BSI BS 3483-B8 | EN-Methods for Testing Pigments for Paints Part B8: Determination of Density (Pyknometer Method)-ISO 787-10: 1993; Renumbered as BS EN ISO 787-10: 1995; | |
| BSI BS 3483-B9 | EN-Methods for Testing Pigments in Paints Part B9: Determination of Density Relative to Water (Using a Centrifuge)-Renumbered as BS EN ISO 787-23 | |
| BSI BS 3483-C1 | EN-Methods for Testing Pigments in Paints Part C1: Determination of Matter Soluble in Water (Hot Extraction Method)-Renumbered as BS EN ISO 787-3: 1995 | |
| BSI BS 3483-C2 | EN-Methods for Testing Pigments in Paints Part C2: Determination of Matter Soluble in Water (Cold Extraction Method)-Renumbered as BS EN ISO 789-8 | |
| BSI BS 3483-C3 | EN-Methods for Testing Pigments in Paints Part C3: Determination of Acidity or Alkalinity of the Aqueous Extract | |
| BSI BS 3483-C4 | EN-Methods for Testing Pigments in Paints Part C4: Determination of pH Value of an Aqueous Suspension-Renumbered as BS EN ISO 787-9 | |
| BSI BS 3483-C7 | EN-Methods for Testing Pigments in Paints Part C7: Comparison of Resistance to Bleeding | |
| BSI BS 3483-C8 | EN-Methods for Testing Pigments in Paints Part C8: Comparison of Heat Stability | |
| BSI BS 3483-D1 | EN-Testing Pigments for Paints Part D1: Method of Dispersion for Assessment of Dispersion Characteristics (Introduction)-ISO 8780-1: 1990; Renumbered as BS EN ISO 8780-1 | |
| BSI BS 3483-D3 | EN-Testing Pigments for Paints Part D3: Method of Dispersion for Assessment of Dispersion Characteristics Using a High-Speed Impeller Mill-Renumbered as BS EN ISO 8780-3:1991; ISO 8780-3: 1990 | |
| BSI BS 3483-D4 | EN-Testing Pigments for Paints Part D4: Method of Dispersion for Assessment of Dispersion Characteristics Using a Bead Mill-ISO 8780-4: 1990; Renumbered as BS EN ISO 8780-4: 1995 | |
| BSI BS 3483-D5 | EN-Testing Pigments for Paints Part D5: Method of Dispersion for Assessment of Dispersion Characteristics Using an Automatic Muller-ISO 8780-5: 1990; Renumbered as BS EN ISO 8780-5 | |
| BSI BS 3483-D6 | EN-Testing Pigments for Paints Part D6: Method of Dispersion for Assessment of Dispersion Characteristics Using a Triple-Roll Mill-ISO 8780-6: 1990; Renumbered as BS EN ISO 8780-6 | |
| BSI BS 3483-E1 | EN-Testing Pigments for Paints Part E1: Assessment of Dispersion Characteristics from the Change in Tinting Strength of Coloured Pigments-ISO 8781-1: 1990; Renumbered as BS EN ISO 8781-1: 1995 | |
| BSI BS 3483-E2 | EN-Testing Pigments for Paints Part E2: Assessment of Dispersion Characteristics from the Change in Fineness of Grind-ISO 8781-2: 1990; Renumbered as BS EN ISO 8781-2 | |
| BSI BS 3483-E3 | EN-Testing Pigments for Paints Part E3: Assessment of Dispersion Characteristics from the Change in Gloss-ISO 8781-3: 1990; Renumbered as BS EN ISO 8781-3: 1995 | |
| BSI BS 3484-1 | EN-Record inks Part 1: Specification for blue-black inks-AMD 8071:February 1994; Supersedes BS 3484:1962 | |
| BSI BS 3484-2 | EN-Record Inks - Part 2: Specification for Permanent Inks | |
| BSI BS 3486-1 | EN-Wheels for Tractors and Machinery for Agriculture and Forestry Part 1: Specification for Wheel-to-Hub Fixing Dimensions (ISO 5711: 1995) (E) | |
| BSI BS 3487-4 | EN-Tracheal Tubes Part 4: Specification for Tubes of the Cole Type-ISO 5361-4:1987; | |
| BSI BS 3488 | EN-Specification for Technical anhydrous lanolin-AMD 6162: February 1990 | |
| BSI BS 3492 | EN-Road and Rail Tanker Hoses and Hose Assemblies for Petroleum Products Including Aviation Fuels | |
| BSI BS 350 | EN-Conversion factors for units | |
| BSI BS 3502-3 | EN-Symbols for Plastics and Rubber Materials Part 3: Schedule for Symbols for Compounding Ingredients (V) | |
| BSI BS 3504 | EN-Specification for Magnesium-activated nickel for cathodes of electronic tubes and valves-AMD 4723: November 1962 | |
| BSI BS 3505 | EN-Unplasticized Polyvinyl Chloride (PVC-U) Pressure Pipes for Cold Potable Water -AMD 6130: November 1988 | |
| BSI BS 3506 | EN-Specification for Unplasticized PVC pipe - For industrial uses-AMD 1152: September 1973; AMD 1777: July 1975 | |
| BSI BS 3507 | EN-Orthodontic Wire and Tape and Dental Ligature Wire | |
| BSI BS 3509 | EN-Specification for Spirit level vials | |
| BSI BS 3517 | EN-Thermal Shock Tests on Laboratory Glassware (ISO 718: 1990) | |
| BSI BS 3518-1 | EN-Methods of Fatigue testing - Part 1: Guide to general principles | |
| BSI BS 3518-2 | EN-Methods of Fatigue Testing Part 2: Rotating Bending Fatigue Tests-AMD 4745: December 1962 | |
| BSI BS 3518-3 | EN-Methods of Fatigue Testing Part 3: Direct Stress Fatigue Tests | |
| BSI BS 3520 | EN-Dental Wrought Precious Metal Alloy Wire | |
| BSI BS 3521-1 | EN-Terms Relating to Ophthalmic Optics and Spectacle Frames Part 1: Glossary of Terms Relating to Ophthalmic Lenses-Supersedes BS 3521 PARTS 1&2:1962 | |
| BSI BS 3521-2 | EN-Terms Relating to Ophthalmic Optics and Spectacle Frames Part 2: Glossary of Terms Relating to Spectacle Frames (AMD 9203) August 15 1996 (N)-Amd 1; Supersedes BS 3521 PARTS 1&2:1962 | |
| BSI BS 3522 | EN-Specification for Hypodermic surgical mounted needles (Luer fitting) | |
| BSI BS 3523 | EN-Specification for Granular Desiccant Silica Gel Impregnated with Cobalt Chloride-AMD 9655: September 1997 | |
| BSI BS 3529 | EN-Dimensions of Flywheel Housing Mounting Pads and Brackets for I.C. Engines | |
| BSI BS 3531-11 | EN-Implants for Osteosynthesis Part 11: Specification for Staples with Parallel Legs (ISO 8827: 1988) | |
| BSI BS 3531-14.2 | EN-Surgical Implants Part 14: Intramedullary Nailing Systems Section 14.2: Medullary Pins (Rush Type) and Introducer/Extractors | |
| BSI BS 3531-15 | EN-Implants for Osteosynthesis Part 15: Specification for Devices for the Fixation of the Ends of the Femur in Adults (ISO 8615: 1991) | |
| BSI BS 3531-23.1 | EN-Implants for Osteosynthesis Part 23: Bone Plates Section 23.1: Method for Determination of Bending Strength and Stiffness (ISO 9585: 1990) | |
| BSI BS 3531-23.2 | EN-Implants for Osteosynthesis Part 23: Bone Plates Section 23.2: Specification for Holes and Slots for Use with Screws of 4.5 mm 4.2 mm 4.0 mm 3.9 mm 3.5 mm and 2.9 mm Nominal Sizes (ISO 9269: 1988) (SUP'S BS 3531: | |
| BSI BS 3531-23.3 | EN-Implants for Osteosynthesis Part 23: Bone Plates Section 23.3: Specification for Holes Corresponding to Screws with Asymmetrical Thread and Spherical Undersurfaces (ISO 5836: 1988) | |
| BSI BS 3531-5.1 | EN-Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.1: Specification for Keys for Use with Screws Having Heads with Hexagon Socket | |
| BSI BS 3531-5.2 | EN-Surgical Implants Part 5: Bone Screws and Auxiliary Equipment Section 5.2: Screwdrivers for Screws Having Heads with Single Slot Cruciate Slot or Cross-Recess | |
| BSI BS 3531-5.3 | EN-Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.3: Spec. for the Dimensions of Screws Having Hexagonal Drive Connection Spherical Under-Surfaces and Asymmetrical Thread (ISO 5835: 1 | |
| BSI BS 3531-5.4 | EN-Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.4: Specification for Screws Having Symmetrical and Asymmetrical Thread and Conical Under-Surfaces (ISO 9268: 1988) (SUP'S BS 3456: Par | |
| BSI BS 3531-5.5 | EN-Surgical Implants Part 5: Bone Screws and Auxiliary Equipment Section 5.5: Taps and Drills | |
| BSI BS 3531-5.6 | EN-Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.6: Specification for the Mechanical Requirements and Test Methods for Screws Having Asymmetrical Thread and Spherical Undersurface-ISO | |
| BSI BS 3531-5.7 | EN-Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.7: Specification for Drill Bits Taps and Countersink Cutters (ISO 9714-1: 1991) |