MMS - Non Deepwater Standards (Excludes AWS) Collection
This collection contains documents from the following standards organization(s): American Concrete Institute, American Institute of Steel Construction, American Petroleum Institute, ASME International, ASTM International, NACE International, American National Standards Institute 1 2 3 4 5 > >
| ACI 357R | EN-Guide for the Design and Construction of Fixed Offshore Concrete Structures | |
| AISC 360 | EN-Specification for Structural Steel Buildings-To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide | |
| API API 510 | EN-Pressure Vessel Inspection Code: In-Service Inspection Rating Repair and Alteration-Ninth Edition | |
| ASME B16.5 | EN-Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard | |
| ASME B31.8 | EN-Gas Transmission and Distribution Piping Systems | |
| API BULL 2INT-DG | EN-Interim Guidance for Design of Offshore Structures for Hurricane Conditions-First Edition | |
| API BULL 2INT-EX | EN-Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions-First Edition | |
| API BULL 2INT-MET | EN-Interim Guidance on Hurricane Conditions in the Gulf of Mexico-First Edition | |
| API BULL 2INT-MET ERTA | EN-Interim Guidance on Hurricane Conditions in the Gulf of Mexico-First Edition | |
| ASTM C150 | EN-Standard Specification for Portland Cement | |
| ASTM C33 | EN-Standard Specification for Concrete Aggregates | |
| ASTM C330 | EN-Standard Specification for Lightweight Aggregates for Structural Concrete | |
| ASTM C595 | EN-Standard Specification for Blended Hydraulic Cements | |
| ASTM C94/C94M | EN-Standard Specification for Ready-Mixed Concrete | |
| API MPMS 1 | EN-Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary-Second Edition | |
| API MPMS 10.1 | EN-Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method-THIRD EDITION | |
| API MPMS 10.2 | EN-Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Standard Test Method for Water in Crude Oil by Distillation-SECOND EDITION | |
| API MPMS 10.3 | EN-Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 3-Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)-THIRD EDITION | |
| API MPMS 10.4 | EN-Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)-Third Edition | |
| API MPMS 10.9 | EN-Manual of Petroleum Measurement Standards Chapter 10 Sediment and Water Section 9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Second Edition | |
| API MPMS 11.1 VOL I | EN-Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume I Table 5A - Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6A - Gene | |
| API MPMS 11.2.2 | EN-Manual of Petroleum Measurement Standards Chapter 11.2.2-Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60°F/60°F) and -50°F to 140°F Metering Temperature-Second Edition; Includes E | |
| API MPMS 11.2.2 ADDENDUM | EN-Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Addendum to Section 2 Part 2 - Compressibility Factors for Hydrocarbons Correlation of Vapor Pressure for Commercial Natural Gas Liqui | |
| API MPMS 12.2.1 | EN-Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - | |
| API MPMS 12.2.2 | EN-Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - | |
| API MPMS 14.3.1 | EN-Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty Guidelines-Third Edition; Errata - | |
| API MPMS 14.3.2 | EN-Manual of Petroleum Measurement Standards Chapter 14Natural Gas Fluids Measurement Section 3Concentric Square-Edged Orifice Meters Part 2Specification and Installation Requirements-Fourth Edition; AGA Report No.3 P | |
| API MPMS 14.3.3 | EN-Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric Square-Edged Orifice Meters Part 3 - Natural Gas Applications-Third Edition *Includes Errata* | |
| API MPMS 14.5 | EN-Calculation of Gross Heating Value Relative Density Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer-THIRD EDITION | |
| API MPMS 14.6 | EN-Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 6 - Continuous Density Measurement-Second Edition; Errata: August 5 1998 | |
| API MPMS 14.8 | EN-Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement-Second Edition | |
| API MPMS 2.2A | EN-Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method-First Edition | |
| API MPMS 2.2B | EN-Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method-First Edition | |
| API MPMS 20.1 | EN-Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement-First Edition | |
| API MPMS 21.1 | EN-Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 1 - Electronic Gas Measurement-First Edition | |
| API MPMS 3.1A | EN-Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Second Edition | |
| API MPMS 3.1B | EN-Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging-Second Edition | |
| API MPMS 4.1 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction-Third Edition | |
| API MPMS 4.2 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers-Third Edition | |
| API MPMS 4.4 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers-Second Edition | |
| API MPMS 4.5 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers-Second Edition | |
| API MPMS 4.6 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation-Second Edition | |
| API MPMS 4.7 | EN-Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures-Second Edition | |
| API MPMS 5.1 | EN-Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters-Fourth Edition | |
| API MPMS 5.1 | EN-Manual of Petroleum Measurement Standards Chapter 5-Liquid Metering Section 1-General Considerations for Measurement by Meters-SECOND EDITION | |
| API MPMS 5.2 | EN-Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 2 - Measurement of Liquid Hydrocarbons by Displacement Meters-Third Edition | |
| API MPMS 5.3 | EN-Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters-Fifth Edition | |
| API MPMS 5.4 | EN-Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 4 - Accessory Equipment for Liquid Meters-Fourth Edition | |
| API MPMS 5.5 | EN-Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems-Second Edition | |
| API MPMS 6.1 | EN-Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 1 - Lease Automatic Custody Transfer (LACT) Systems-Second Edition | |
| API MPMS 6.6 | EN-Manual of Petroleum Measurement Standards Chapter 6-Metering Assemblies Section 6-Pipeline Metering Systems-FIRST EDITION | |
| API MPMS 6.6 | EN-Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 6 - Pipeline Metering Systems-Second Edition | |
| API MPMS 6.7 | EN-Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons-Second Edition | |
| API MPMS 7 | EN-Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination-First Edition | |
| API MPMS 8.1 | EN-Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 1 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products-Third Edition; ASTM D4057 | |
| API MPMS 8.1 SPANISH | SP-Manual de Estándares de Medición de Petróleo Capítulo 8-Muestreo Sección 1-Procedimiento Estándar para Muestreo Manual de Petróleo y Productos de Petróleo-Third Edition | |
| API MPMS 8.2 | EN-Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition | |
| API MPMS 9.1 | EN-Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density Relative Density (Specific Gravity) or API Gravity of Crude Petroleum and Liquid Petroleum Pr | |
| API MPMS 9.2 | EN-Manual of Petroleum Measurement Standards Chapter 9 - Determination Section 2 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer-Second Edition | |
| NACE MR0175 | EN-Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments | |
| API RP 14B | EN-Petroleum and natural gas industriesSubsurface safety valve systemsDesign installation operation and redress-Fifth Edition; ISO 10417 | |
| API RP 14C | EN-Recommended Practice for Analysis Design Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms-Seventh Edition | |
| API RP 14E | EN-Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems-FIFTH EDITION | |
| API RP 14F | EN-Design Installation and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1 Division 1 and Division 2 Locations-Fifth Edition | |
| API RP 14FZ | EN-Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I Zone 0 Zone 1 and Zone 2 Locations-First Edition | |
| API RP 14G | EN-Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms-Fourth Edition | |
| API RP 14H | EN-Recommended Practice for Installation Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore-Fifth Edition | |
| API RP 2556 | EN-Correcting Gauge Tables for Incrustation | |
| API RP 2D | EN-Operation and Maintenance of Offshore Cranes-Sixth Edition; Includes Errata: 05/2007 | |
| API RP 2I | EN-In-service Inspection of Mooring Hardware for Floating Structures-THIRD EDITION | |
| API RP 500 | EN-Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Division 1 and Division 2-Second Edition; Errata 10/17/1998 | |
| API RP 505 | EN-Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Zone 0 Zone 1 and Zone 2-First Edition; Errata 8/17/98 | |
| API RP 53 | EN-Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells-Third Edition | |
| API RP 90 | EN-Annular Casing Pressure Management for Offshore Wells-First Edition | |
| NACE RP0176 | EN-Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production-Item 21018; | |
| ASME SEC I A2005 | EN-2005 Summary of Changes | |
| ASME SEC I INDEX | EN-Index | |
| ASME SEC I INT VOL 55 | EN-Interpretations Volume 55 - Section I | |
| ASME SEC I INTRO | EN-Introduction |
1 2 3 4 5 > >