ASTM - Petroleum Products Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM D1655 REV A | EN-Standard Specification for Aviation Turbine Fuels | |
| ASTM D1657 | EN-Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer | |
| ASTM D1662 | EN-Standard Test Method for Active Sulfur in Cutting Oils | |
| ASTM D167 | EN-Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke | |
| ASTM D1742 | EN-Standard Test Method for Oil Separation from Lubricating Grease During Storage | |
| ASTM D1743 | EN-Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases | |
| ASTM D1747 | EN-Standard Test Method for Refractive Index of Viscous Materials | |
| ASTM D1748 | EN-Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet | |
| ASTM D1756 | EN-Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal | |
| ASTM D1796 | EN-Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | |
| ASTM D1826 | EN-Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | |
| ASTM D1831 | EN-Standard Test Method for Roll Stability of Lubricating Grease | |
| ASTM D1832 | EN-Standard Test Method for Peroxide Number of Petroleum Wax | |
| ASTM D1833 | EN-Standard Test Method for Odor of Petroleum Wax | |
| ASTM D1835 | EN-Standard Specification for Liquefied Petroleum (LP) Gases | |
| ASTM D1837 REV A | EN-Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | |
| ASTM D1838 | EN-Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | |
| ASTM D1839 | EN-Standard Test Method for Amyl Nitrate in Diesel Fuels | |
| ASTM D1840 | EN-Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry | |
| ASTM D1857 | EN-Standard Test Method for Fusibility of Coal and Coke Ash | |
| ASTM D187 | EN-Standard Test Method for Burning Quality of Kerosine | |
| ASTM D189 | EN-Standard Test Method for Conradson Carbon Residue of Petroleum Products | |
| ASTM D1945 | EN-Standard Test Method for Analysis of Natural Gas by Gas Chromatography | |
| ASTM D1946 | EN-Standard Practice for Analysis of Reformed Gas by Gas Chromatography | |
| ASTM D197 | EN-Standard Test Method for Sampling and Fineness Test of Pulverized Coal | |
| ASTM D1977 | EN-Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis | |
| ASTM D1988 | EN-Standard Test Method for Mercaptans in Natural Gas Using Length-Of-Stain Detector Tubes | |
| ASTM D2001 | EN-Standard Test Method for Depentanization of Gasoline and Naphthas | |
| ASTM D2007 | EN-Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method | |
| ASTM D2008 | EN-Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products | |
| ASTM D2013/D2013M | EN-Standard Practice for Preparing Coal Samples for Analysis | |
| ASTM D2014 | EN-Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven | |
| ASTM D2068 | EN-Standard Test Method for Determining Filter Blocking Tendency | |
| ASTM D2070 | EN-Standard Test Method for Thermal Stability of Hydraulic Oils | |
| ASTM D2156 | EN-Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels | |
| ASTM D2157 | EN-Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels | |
| ASTM D2158 | EN-Standard Test Method for Residues in Liquefied Petroleum (LP) Gases-IP Designation: 317/95 | |
| ASTM D2161 | EN-Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity | |
| ASTM D2162 | EN-Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards | |
| ASTM D2163 | EN-Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography | |
| ASTM D217 | EN-Standard Test Methods for Cone Penetration of Lubricating Grease | |
| ASTM D2234/D2234M | EN-Standard Practice for Collection of a Gross Sample of Coal | |
| ASTM D2265 | EN-Standard Test Method for Dropping Point of Lubricating Grease over Wide Temperature Range | |
| ASTM D2266 | EN-Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) | |
| ASTM D2268 | EN-Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography | |
| ASTM D2269 | EN-Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption | |
| ASTM D2270 | EN-Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°C-IP Designation: 226/91 (95); British Standard 4459 | |
| ASTM D2272 | EN-Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel | |
| ASTM D2273 | EN-Standard Test Method for Trace Sediment in Lubricating Oils | |
| ASTM D2274 REV A | EN-Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) | |
| ASTM D2276 | EN-Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling | |
| ASTM D2318 | EN-Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch | |
| ASTM D2319/D2319M | EN-Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) | |
| ASTM D2320 | EN-Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) | |
| ASTM D2384 | EN-Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures | |
| ASTM D2386 | EN-Standard Test Method for Freezing Point of Aviation Fuels | |
| ASTM D2392 | EN-Standard Test Method for Color of Dyed Aviation Gasolines | |
| ASTM D240 | EN-Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | |
| ASTM D2415 | EN-Standard Test Method for Ash in Coal Tar and Pitch | |
| ASTM D2416 | EN-Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) | |
| ASTM D2420 | EN-Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) | |
| ASTM D2421 | EN-Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Mass Basis | |
| ASTM D2422 | EN-Standard Classification of Industrial Fluid Lubricants by Viscosity System | |
| ASTM D2423 | EN-Standard Test Method for Surface Wax on Waxed Paper or Paperboard | |
| ASTM D2425 | EN-Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry | |
| ASTM D2426 | EN-Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography | |
| ASTM D2427 | EN-Standard Test Method for Determination of C2 Through C5 Hydrocarbons in Gasolines by Gas Chromatography | |
| ASTM D2492 | EN-Standard Test Method for Forms of Sulfur in Coal | |
| ASTM D2500 | EN-Standard Test Method for Cloud Point of Petroleum Products | |
| ASTM D2501 | EN-Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils | |
| ASTM D2502 | EN-Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements | |
| ASTM D2503 | EN-Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | |
| ASTM D2504 | EN-Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography | |
| ASTM D2505 | EN-Standard Test Method for Ethylene Other Hydrocarbons and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography | |
| ASTM D2509 | EN-Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) | |
| ASTM D2510 | EN-Standard Test Method for Adhesion of Solid Film Lubricants | |
| ASTM D2511 | EN-Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants | |
| ASTM D2532 | EN-Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants | |
| ASTM D2534 | EN-Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |