ASTM - Metals Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM A965/A965M REV A | EN-Standard Specification for Steel Forgings Austenitic for Pressure and High Temperature Parts | |
| ASTM A966/A966M | EN-Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current | |
| ASTM A967 | EN-Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts | |
| ASTM A968/A968M | EN-Standard Specification for Chromium Chromium-Nickel and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service | |
| ASTM A970/A970M | EN-Standard Specification for Headed Steel Bars for Concrete Reinforcement | |
| ASTM A971/A971M | EN-Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
| ASTM A972/A972M | EN-Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | |
| ASTM A973/A973M | EN-Standard Specification for Grade 100 Alloy Steel Chain | |
| ASTM A974 | EN-Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) | |
| ASTM A975 | EN-Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire with Poly(Vinyl Chloride) (PVC) Coating) | |
| ASTM A976 | EN-Standard Classification of Insulating Coatings for Electrical Steels by Composition Relative Insulating Ability and Application | |
| ASTM A977/A977M | EN-Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs | |
| ASTM A978/A978M | EN-Standard Specification for Composite Ribbed Steel Pipe Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers Storm Sewers and Other Special Applications | |
| ASTM A979/A979M | EN-Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | |
| ASTM A980 | EN-Standard Specification for Steel Sheet Carbon Ultra High Strength Cold Rolled | |
| ASTM A981 | EN-Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand Grade 270 Uncoated Used in Prestressed Ground Anchors | |
| ASTM A982/A982M | EN-Standard Specification for Steel Forgings Stainless for Compressor and Turbine Airfoils | |
| ASTM A983/A983M | EN-Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | |
| ASTM A984/A984M | EN-Standard Specification for Steel Line Pipe Black Plain-End Electric-Resistance-Welded | |
| ASTM A985/A985M | EN-Standard Specification for Steel Investment Castings General Requirements for Pressure-Containing Parts | |
| ASTM A986/A986M | EN-Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | |
| ASTM A987/A987M | EN-Standard Practice for Measuring Shape Characteristics of Tin Mill Products | |
| ASTM A988/A988M | EN-Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges Fittings Valves and Parts for High Temperature Service | |
| ASTM A989/A989M | EN-Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges Fittings Valves and Parts for High Temperature Service | |
| ASTM A99 | EN-Standard Specification for Ferromanganese | |
| ASTM A990 | EN-Standard Specification for Castings Iron-Nickel-Chromium and Nickel Alloys Specially Controlled for Pressure Retaining Parts for Corrosive Service | |
| ASTM A991/A991M | EN-Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
| ASTM A992/A992M REV A | EN-Standard Specification for Structural Steel Shapes | |
| ASTM A994 | EN-Standard Guide for Editorial Procedures and Form of Product Specifications for Steel Stainless Steel and Related Alloys | |
| ASTM A995/A995M | EN-Standard Specification for Castings Austenitic-Ferritic (Duplex) Stainless Steel for Pressure-Containing Parts | |
| ASTM A996/A996M REV B | EN-Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement | |
| ASTM A997 | EN-Standard Practice for Investment Castings Surface Acceptance Standards Visual Examination | |
| ASTM A998/A998M | EN-Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
| ASTM A999/A999M REV A | EN-Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | |
| ASTM B1 | EN-Standard Specification for Hard-Drawn Copper Wire | |
| ASTM B100 | EN-Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use | |
| ASTM B101 | EN-Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction | |
| ASTM B102 | EN-Standard Specification for Lead- and Tin-Alloy Die Castings | |
| ASTM B103/B103M | EN-Standard Specification for Phosphor Bronze Plate Sheet Strip and Rolled Bar | |
| ASTM B105 | EN-Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors | |
| ASTM B106 | EN-Standard Test Methods for Flexivity of Thermostat Metals | |
| ASTM B107/B107M | EN-Standard Specification for Magnesium-Alloy Extruded Bars Rods Profiles Tubes and Wire | |
| ASTM B108/B108M | EN-Standard Specification for Aluminum-Alloy Permanent Mold Castings | |
| ASTM B111/B111M | EN-Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | |
| ASTM B114 | EN-Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors | |
| ASTM B115 | EN-Standard Specification for Electrolytic Copper Cathode | |
| ASTM B116 | EN-Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage | |
| ASTM B117 | EN-Standard Practice for Operating Salt Spray (Fog) Apparatus | |
| ASTM B121/B121M | EN-Standard Specification for Leaded Brass Plate Sheet Strip and Rolled Bar | |
| ASTM B122/B122M | EN-Standard Specification for Copper-Nickel-Tin Alloy Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Alloy Plate Sheet Strip and Rolled Bar | |
| ASTM B124/B124M | EN-Standard Specification for Copper and Copper Alloy Forging Rod Bar and Shapes | |
| ASTM B127 | EN-Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate Sheet and Strip | |
| ASTM B129 | EN-Standard Specification for Cartridge Brass Cartridge Case Cups | |
| ASTM B130 | EN-Standard Specification for Commercial Bronze Strip for Bullet Jackets | |
| ASTM B131 | EN-Standard Specification for Copper Alloy Bullet Jacket Cups | |
| ASTM B134/B134M | EN-Standard Specification for Brass Wire | |
| ASTM B135 REV A | EN-Standard Specification for Seamless Brass Tube | |
| ASTM B135M REV A | EN-Standard Specification for Seamless Brass Tube [Metric] | |
| ASTM B136 | EN-Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum | |
| ASTM B137 | EN-Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum | |
| ASTM B138/B138M | EN-Standard Specification for Manganese Bronze Rod Bar and Shapes | |
| ASTM B139/B139M | EN-Standard Specification for Phosphor Bronze Rod Bar and Shapes | |
| ASTM B140/B140M | EN-Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod Bar and Shapes | |
| ASTM B148 | EN-Standard Specification for Aluminum-Bronze Sand Castings | |
| ASTM B150/B150M | EN-Standard Specification for Aluminum Bronze Rod Bar and Shapes | |
| ASTM B151/B151M | EN-Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar | |
| ASTM B152/B152M | EN-Standard Specification for Copper Sheet Strip Plate and Rolled Bar | |
| ASTM B153 | EN-Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing | |
| ASTM B154 | EN-Standard Test Method for Mercurous Nitrate Test for Copper Alloys | |
| ASTM B159/B159M | EN-Standard Specification for Phosphor Bronze Wire | |
| ASTM B16/B16M | EN-Standard Specification for Free-Cutting Brass Rod Bar and Shapes for Use in Screw Machines | |
| ASTM B160 | EN-Standard Specification for Nickel Rod and Bar | |
| ASTM B161 | EN-Standard Specification for Nickel Seamless Pipe and Tube | |
| ASTM B162 | EN-Standard Specification for Nickel Plate Sheet and Strip | |
| ASTM B163 | EN-Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat- Exchanger Tubes | |
| ASTM B164 | EN-Standard Specification for Nickel-Copper Alloy Rod Bar and Wire | |
| ASTM B165 | EN-Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube | |
| ASTM B166 | EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06603 N06690 N06693 N06025 N06045 and N06696)* and Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod Bar and Wire | |
| ASTM B167 | EN-Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600 N06601 N06603 N06690 N06693 N06025 N06045 and N06696)* and Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube |