ASTM - Metals Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM E1934 REV A | EN-Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography | |
| ASTM E1935 | EN-Standard Test Method for Calibrating and Measuring CT Density | |
| ASTM E1936 | EN-Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems | |
| ASTM E1938 | EN-Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry | |
| ASTM E194 | EN-Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders | |
| ASTM E1941 | EN-Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | |
| ASTM E1944 | EN-Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests | |
| ASTM E1947 | EN-Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data | |
| ASTM E1948 | EN-Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data | |
| ASTM E1949 | EN-Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages | |
| ASTM E1950 | EN-Standard Practice for Reporting Results from Methods of Chemical Analysis | |
| ASTM E1951 | EN-Standard Guide for Calibrating Reticles and Light Microscope Magnifications | |
| ASTM E1955 | EN-Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs | |
| ASTM E1961 | EN-Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units | |
| ASTM E1961 | EN-Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units | |
| ASTM E1962 | EN-Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques | |
| ASTM E1982 | EN-Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air | |
| ASTM E1999 | EN-Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry | |
| ASTM E2001 | EN-Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts | |
| ASTM E2002 | EN-Standard Practice for Determining Total Image Unsharpness in Radiology | |
| ASTM E2003 | EN-Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators | |
| ASTM E2007 | EN-Standard Guide for Computed Radiography | |
| ASTM E2014 | EN-Standard Guide on Metallographic Laboratory Safety | |
| ASTM E2015 | EN-Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination | |
| ASTM E2023 | EN-Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators | |
| ASTM E2024 | EN-Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector | |
| ASTM E2027 | EN-Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals Ores and Related Materials | |
| ASTM E2028 | EN-Standard Practice for Receiving Testing and Reporting Results of Investigation of Metal Ore or Metal Related Samples That Are or May Be Involved in Litigation | |
| ASTM E2033 | EN-Standard Practice for Computed Radiology (Photostimulable Luminescence Method) | |
| ASTM E204 | EN-Standard Practices for Identification of Material by Infrared Absorption Spectroscopy Using the ASTM Coded Band and Chemical Classification Index | |
| ASTM E2050 | EN-Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method | |
| ASTM E2056 | EN-Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses Calibrated Using Surrogate Mixtures | |
| ASTM E2066 | EN-Standard Guide for Validation of Laboratory Information Management Systems | |
| ASTM E2075/E2075M | EN-Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod | |
| ASTM E2076/E2076M | EN-Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission | |
| ASTM E2077 | EN-Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data | |
| ASTM E2078 | EN-Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data | |
| ASTM E208 | EN-Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels | |
| ASTM E209 | EN-Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates | |
| ASTM E2093 | EN-Standard Guide for Optimizing Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization | |
| ASTM E2096 | EN-Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing | |
| ASTM E21 | EN-Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials | |
| ASTM E2104 | EN-Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components | |
| ASTM E2105 | EN-Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) | |
| ASTM E2108 | EN-Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer | |
| ASTM E2109 | EN-Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings | |
| ASTM E213 | EN-Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing | |
| ASTM E2142 | EN-Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope | |
| ASTM E215 | EN-Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube | |
| ASTM E2191/E2191M | EN-Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission | |
| ASTM E2192 | EN-Standard Guide for Planar Flaw Height Sizing by Ultrasonics | |
| ASTM E2207 | EN-Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin- Walled Tubular Specimens | |
| ASTM E2208 | EN-Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems | |
| ASTM E2209 | EN-Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry | |
| ASTM E2218 | EN-Standard Test Method for Determining Forming Limit Curves | |
| ASTM E2223 | EN-Standard Practice for Examination of Seamless Gas-Filled Steel Pressure Vessels Using Angle Beam Ultrasonics | |
| ASTM E2242 | EN-Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure | |
| ASTM E2244 | EN-Standard Test Method for In-Plane Length Measurements of Thin Reflecting Films Using an Optical Interferometer | |
| ASTM E2245 | EN-Standard Test Method for Residual Strain Measurements of Thin Reflecting Films Using an Optical Interferometer | |
| ASTM E2246 | EN-Standard Test Method for Strain Gradient Measurements of Thin Reflecting Films Using an Optical Interferometer | |
| ASTM E2248 | EN-Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens | |
| ASTM E2261 | EN-Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique | |
| ASTM E2283 | EN-Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features | |
| ASTM E2293 | EN-Standard Practice for Drying of Metal Bearing Ores Concentrates and Related Metallurgical Materials for the Determination of Mercury | |
| ASTM E2294 | EN-Standard Practice for Proof Silver Corrections in Metal Bearing Ores Concentrates and Related Materials by Fire Assay Gravimetry | |
| ASTM E2295 | EN-Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores Concentrates and Related Metallurgical Materials by Silver Determination in Slags and Cupels | |
| ASTM E2296 | EN-Standard Practice for Silver Corrections in Metal Bearing Ores Concentrates and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry | |
| ASTM E2297 | EN-Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods | |
| ASTM E2298 | EN-Standard Test Method for Instrumented Impact Testing of Metallic Materials | |
| ASTM E23 REV A | EN-Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | |
| ASTM E2309 | EN-Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines | |
| ASTM E2310 | EN-Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy | |
| ASTM E2337/E2337M | EN-Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing | |
| ASTM E2338 | EN-Standard Practice for Characterization of Coatings Using Conformable Eddy- Current Sensors without Coating Reference Standards | |
| ASTM E2339 | EN-Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) | |
| ASTM E2367 | EN-Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter | |
| ASTM E2368 | EN-Standard Practice for Strain Controlled Thermomechanical Fatigue Testing | |
| ASTM E2371 | EN-Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry | |
| ASTM E2373 | EN-Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |