ASTM - Metals Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM C564 REV A | EN-Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings | |
| ASTM C614 | EN-Standard Test Method for Alkali Resistance of Porcelain Enamels | |
| ASTM C632 | EN-Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling | |
| ASTM C633 | EN-Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings | |
| ASTM C660 | EN-Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling | |
| ASTM C664 | EN-Standard Test Methods for Thickness of Diffusion Coating | |
| ASTM C694 REV A | EN-Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution | |
| ASTM C703 | EN-Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum | |
| ASTM C715 | EN-Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis | |
| ASTM C743 | EN-Standard Test Method for Continuity of Porcelain Enamel Coatings | |
| ASTM C756 | EN-Standard Test Method for Cleanability of Surface Finishes | |
| ASTM C774 | EN-Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing | |
| ASTM C810 | EN-Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry | |
| ASTM C839 | EN-Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method | |
| ASTM C872 | EN-Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces | |
| ASTM C876 | EN-Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete | |
| ASTM D1730 | EN-Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting | |
| ASTM D1731 | EN-Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting | |
| ASTM D1732 | EN-Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting | |
| ASTM D2495 | EN-Standard Test Method for Moisture in Cotton by Oven-Drying | |
| ASTM D832 | EN-Standard Practice for Rubber Conditioning For Low Temperature Testing | |
| ASTM E10 | EN-Standard Test Method for Brinell Hardness of Metallic Materials | |
| ASTM E1000 | EN-Standard Guide for Radioscopy | |
| ASTM E1001 | EN-Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves | |
| ASTM E1002 | EN-Standard Test Method for Leaks Using Ultrasonics | |
| ASTM E1003 | EN-Standard Test Method for Hydrostatic Leak Testing | |
| ASTM E1004 | EN-Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method | |
| ASTM E1009 | EN-Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel | |
| ASTM E1010 | EN-Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting | |
| ASTM E1012 | EN-Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application | |
| ASTM E1016 | EN-Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers | |
| ASTM E1019 | EN-Standard Test Methods for Determination of Carbon Sulfur Nitrogen and Oxygen in Steel Iron Nickel and Cobalt Alloys by Various Combustion and Fusion Techniques | |
| ASTM E1025 | EN-Standard Practice for Design Manufacture and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology | |
| ASTM E103 | EN-Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials | |
| ASTM E1030 | EN-Standard Test Method for Radiographic Examination of Metallic Castings | |
| ASTM E1032 | EN-Standard Test Method for Radiographic Examination of Weldments | |
| ASTM E1033 | EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature | |
| ASTM E1049 | EN-Standard Practices for Cycle Counting in Fatigue Analysis | |
| ASTM E1059 | EN-Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes | |
| ASTM E106 | EN-Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys | |
| ASTM E1065 | EN-Standard Guide for Evaluating Characteristics of Ultrasonic Search Units | |
| ASTM E1066 | EN-Standard Test Method for Ammonia Colorimetric Leak Testing | |
| ASTM E1067 | EN-Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels | |
| ASTM E1070 | EN-Standard Test Method for Determination of Phosphorus in Iron Ores by Photometric Method | |
| ASTM E1077 | EN-Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens | |
| ASTM E1078 | EN-Standard Guide for Specimen Preparation and Mounting in Surface Analysis | |
| ASTM E1079 | EN-Standard Practice for Calibration of Transmission Densitometers | |
| ASTM E1085 | EN-Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry | |
| ASTM E1086 | EN-Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Stainless Steel by Point-to-Plane Excitation Technique | |
| ASTM E1097 | EN-Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis | |
| ASTM E110 | EN-Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers | |
| ASTM E1106 | EN-Standard Test Method for Primary Calibration of Acoustic Emission Sensors | |
| ASTM E111 | EN-Standard Test Method for Young's Modulus Tangent Modulus and Chord Modulus | |
| ASTM E1114 | EN-Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources | |
| ASTM E1118 | EN-Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) | |
| ASTM E112 | EN-Standard Test Methods for Determining Average Grain Size | |
| ASTM E1127 | EN-Standard Guide for Depth Profiling in Auger Electron Spectroscopy | |
| ASTM E1135 | EN-Standard Test Method for Comparing the Brightness of Fluorescent Penetrants | |
| ASTM E1139 | EN-Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries | |
| ASTM E114 | EN-Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing | |
| ASTM E1140 | EN-Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography | |
| ASTM E1151 | EN-Standard Practice for Ion Chromatography Terms and Relationships | |
| ASTM E1158 | EN-Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material | |
| ASTM E1161 | EN-Standard Practice for Radiologic Examination of Semiconductors and Electronic Components | |
| ASTM E1162 | EN-Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS) | |
| ASTM E1165 | EN-Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging | |
| ASTM E1172 | EN-Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer | |
| ASTM E1180 | EN-Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation | |
| ASTM E1181 | EN-Standard Test Methods for Characterizing Duplex Grain Sizes | |
| ASTM E1184 | EN-Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis | |
| ASTM E1208 | EN-Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process | |
| ASTM E1209 | EN-Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process | |
| ASTM E1210 | EN-Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process | |
| ASTM E1211 | EN-Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors | |
| ASTM E1212 | EN-Standard Practice for Quality Management Systems for Nondestructive Testing Agencies | |
| ASTM E1213 | EN-Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems | |
| ASTM E1217 | EN-Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers and Auger Electron Spectroscopy | |
| ASTM E1219 | EN-Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process | |
| ASTM E1220 | EN-Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |