ASTM - Metals Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM B919 | EN-Standard Specification for Welded Copper Heat Exchanger Tubes with Internal Enhancement | |
| ASTM B92/B92M | EN-Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting | |
| ASTM B920 | EN-Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution | |
| ASTM B921 | EN-Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys | |
| ASTM B922 | EN-Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption | |
| ASTM B923 | EN-Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry | |
| ASTM B924 | EN-Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins | |
| ASTM B925 | EN-Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens | |
| ASTM B926 | EN-Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table | |
| ASTM B927/B927M | EN-Standard Specification for Brass Rod Bar and Shapes | |
| ASTM B928/B928M | EN-Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments | |
| ASTM B929 | EN-Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar | |
| ASTM B93/B93M | EN-Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings Permanent Mold Castings and Die Castings | |
| ASTM B930 | EN-Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) | |
| ASTM B931 | EN-Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts | |
| ASTM B932 | EN-Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate Sheet and Strip | |
| ASTM B933 | EN-Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials | |
| ASTM B934 REV A | EN-Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements | |
| ASTM B935 | EN-Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials | |
| ASTM B936 | EN-Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate Sheet Strip and Rolled Bar | |
| ASTM B937 | EN-Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) | |
| ASTM B939 | EN-Standard Test Method for Radial Crushing Strength K of Powder Metallurgy (PM) Bearings and Structural Materials | |
| ASTM B94 | EN-Standard Specification for Magnesium-Alloy Die Castings | |
| ASTM B940 | EN-Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces | |
| ASTM B941 | EN-Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes | |
| ASTM B942 | EN-Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations | |
| ASTM B943 | EN-Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications | |
| ASTM B944 | EN-Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) | |
| ASTM B945 | EN-Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1 T2 T5 and T10-Type Tempers | |
| ASTM B946 | EN-Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products | |
| ASTM B947 | EN-Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate | |
| ASTM B949 | EN-Standard Specification for General Requirements for Zinc and Zinc Alloy Products | |
| ASTM B950 | EN-Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys | |
| ASTM B951 | EN-Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys Cast and Wrought | |
| ASTM B952/B952M | EN-Standard Specification for Zinc Alloys in Ingot Form for Spin Casting | |
| ASTM B953 | EN-Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis | |
| ASTM B954 | EN-Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry | |
| ASTM B955/B955M | EN-Standard Specification for Aluminum-Alloy Centrifugal Castings | |
| ASTM B956 | EN-Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins | |
| ASTM B957 | EN-Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors | |
| ASTM B958 | EN-Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors | |
| ASTM B96/B96M | EN-Standard Specification for Copper-Silicon Alloy Plate Sheet Strip and Rolled Bar for General Purposes and Pressure Vessels | |
| ASTM B960 | EN-Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc | |
| ASTM B961 | EN-Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application | |
| ASTM B962 | EN-Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes- Principle | |
| ASTM B963 | EN-Standard Test Methods for Oil Content Oil-Impregnation Efficiency and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes- Principle | |
| ASTM B964 | EN-Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel | |
| ASTM B965 | EN-Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability | |
| ASTM B966 | EN-Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas | |
| ASTM B967/B967M | EN-Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod Bar and Wire | |
| ASTM B968/B968M | EN-Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube | |
| ASTM B969 | EN-Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting Thixocast and Rheocast Semi-Solid Casting Processes | |
| ASTM B970 | EN-Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts | |
| ASTM B971 | EN-Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application | |
| ASTM B972 | EN-Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application | |
| ASTM B973 | EN-Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application | |
| ASTM B98/B98M | EN-Standard Specification for Copper-Silicon Alloy Rod Bar and Shapes | |
| ASTM B99/B99M | EN-Standard Specification for Copper-Silicon Alloy Wire for General Applications | |
| ASTM BP-01 | EN-PORTABLE DOCUMENT FORMAT HEALTHCARE A BEST PRACTICES GUIDE | |
| ASTM C1173 | EN-Standard Specification for Flexible Transition Couplings for Underground Piping Systems | |
| ASTM C1277 REV A | EN-Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| ASTM C1440 | EN-Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain Waste and Vent (DWV) Sewer Sanitary and Storm Plumbing Systems | |
| ASTM C1460 | EN-Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground | |
| ASTM C1461 | EN-Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain Waste and Vent (DWV) Sewer Sanitary and Storm Plumbing Systems for Above and Below Ground Use | |
| ASTM C1540 REV A | EN-Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| ASTM C1541 | EN-Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings | |
| ASTM C1563 | EN-Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain Waste Vent and Storm Piping Applications | |
| ASTM C282 | EN-Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test) | |
| ASTM C283 | EN-Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid | |
| ASTM C285 | EN-Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel | |
| ASTM C286 | EN-Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems | |
| ASTM C346 | EN-Standard Test Method for 45-deg Specular Gloss of Ceramic Materials | |
| ASTM C374 | EN-Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) | |
| ASTM C375 | EN-Standard Classification of Water Used in Milling of Porcelain Enamel | |
| ASTM C385 | EN-Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils | |
| ASTM C448 | EN-Standard Test Methods for Abrasion Resistance of Porcelain Enamels | |
| ASTM C536 | EN-Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing | |
| ASTM C537 | EN-Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage | |
| ASTM C538 | EN-Standard Test Method for Color Retention of Red Orange and Yellow Porcelain Enamels |