ASTM - Metals Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM B764 | EN-Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) | |
| ASTM B765 | EN-Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings | |
| ASTM B766 | EN-Standard Specification for Electrodeposited Coatings of Cadmium | |
| ASTM B767 | EN-Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures | |
| ASTM B768 | EN-Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet | |
| ASTM B769 | EN-Standard Test Method for Shear Testing of Aluminum Alloys | |
| ASTM B77 | EN-Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys | |
| ASTM B770 | EN-Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications | |
| ASTM B771 | EN-Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides | |
| ASTM B772 | EN-Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing) | |
| ASTM B773 | EN-Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies | |
| ASTM B774 | EN-Standard Specification for Low Melting Point Alloys | |
| ASTM B775 | EN-Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe | |
| ASTM B776 | EN-Standard Specification for Hafnium and Hafnium Alloy Strip Sheet and Plate | |
| ASTM B777 | EN-Standard Specification for Tungsten Base High-Density Metal | |
| ASTM B778 | EN-Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW) | |
| ASTM B779 | EN-Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors Steel-Reinforced (ACSR/TW) | |
| ASTM B78 | EN-Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating | |
| ASTM B780 | EN-Standard Specification for 75 % Silver 24.5 % Copper 0.5 % Nickel Electrical Contact Alloy | |
| ASTM B781 REV A | EN-Standard Guide for Silver-Cadmium Oxide Contact Material | |
| ASTM B783 | EN-Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts | |
| ASTM B784 | EN-Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables | |
| ASTM B786 | EN-Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation | |
| ASTM B787/B787M | EN-Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation | |
| ASTM B788/B788M | EN-Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe | |
| ASTM B789/B789M | EN-Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers | |
| ASTM B790/B790M | EN-Standard Practice for Structural Design of Corrugated Aluminum Pipe Pipe-Arches and Arches for Culverts Storm Sewers and Other Buried Conduits | |
| ASTM B792 | EN-Standard Specification for Zinc Alloys in Ingot Form for Slush Casting | |
| ASTM B793 | EN-Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds | |
| ASTM B794 | EN-Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements | |
| ASTM B795 | EN-Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials | |
| ASTM B796 | EN-Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications | |
| ASTM B797 | EN-Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts | |
| ASTM B798 | EN-Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography | |
| ASTM B799 | EN-Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/ Sulfur-Dioxide Vapor | |
| ASTM B8 | EN-Standard Specification for Concentric-Lay-Stranded Copper Conductors Hard Medium-Hard or Soft | |
| ASTM B80 | EN-Standard Specification for Magnesium-Alloy Sand Castings | |
| ASTM B800 | EN-Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers | |
| ASTM B801 | EN-Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation | |
| ASTM B802/B802M | EN-Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors Steel Reinforced (ACSR) | |
| ASTM B803 | EN-Standard Specification for High-Strength Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors | |
| ASTM B804 | EN-Standard Specification for UNS N08367 and UNS N08926 Welded Pipe | |
| ASTM B805 | EN-Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire | |
| ASTM B806 REV A | EN-Standard Specification for Copper Alloy Permanent Mold Castings for General Applications | |
| ASTM B807/B807M | EN-Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys | |
| ASTM B808 | EN-Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances | |
| ASTM B809 | EN-Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (-Flowers-of-Sulfur-) | |
| ASTM B810 REV A | EN-Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons | |
| ASTM B811 | EN-Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding | |
| ASTM B812 | EN-Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications | |
| ASTM B813 | EN-Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube | |
| ASTM B814 | EN-Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate Sheet and Strip | |
| ASTM B815 | EN-Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod | |
| ASTM B816 | EN-Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited | |
| ASTM B817 | EN-Standard Specification for Powder Metallurgy (PM) Titanium Alloy Structural Components | |
| ASTM B818 | EN-Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate Sheet and Strip | |
| ASTM B819 | EN-Standard Specification for Seamless Copper Tube for Medical Gas Systems | |
| ASTM B820 | EN-Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip | |
| ASTM B821 | EN-Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis | |
| ASTM B822 | EN-Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering | |
| ASTM B823 | EN-Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts | |
| ASTM B824 | EN-Standard Specification for General Requirements for Copper Alloy Castings | |
| ASTM B825 | EN-Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples | |
| ASTM B826 | EN-Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes | |
| ASTM B827 | EN-Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests | |
| ASTM B828 | EN-Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings | |
| ASTM B829 REV A | EN-Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube | |
| ASTM B830 | EN-Standard Specification for Uniform Test Methods and Frequency | |
| ASTM B831 | EN-Standard Test Method for Shear Testing of Thin Aluminum Alloy Products | |
| ASTM B832 | EN-Standard Guide for Electroforming with Nickel and Copper | |
| ASTM B833 | EN-Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel | |
| ASTM B834 | EN-Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges Fittings Valves and Par | |
| ASTM B835 | EN-Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction | |
| ASTM B836 | EN-Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction | |
| ASTM B837 | EN-Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems | |
| ASTM B839 | EN-Standard Test Method for Residual Embrittlement in Metallic Coated Externally Threaded Articles Fasteners and Rod-Inclined Wedge Method | |
| ASTM B84 | EN-Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors | |
| ASTM B840 | EN-Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits | |
| ASTM B841 | EN-Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits |