ASTM - Standards (Active/historical) Collection
This collection contains documents from the following standards organization(s): ASTM International
| ASTM D244 | EN-Standard Test Methods and Practices for Emulsified Asphalts | |
| ASTM D244 REV C | EN-Standard Test Methods and Practices for Emulsified Asphalts-AASHTO No.: T 59 | |
| ASTM D2440 | EN-Standard Test Method for Oxidation Stability of Mineral Insulating Oil | |
| ASTM D2440 | EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF MINERAL INSULATING OIL | |
| ASTM D2440 | EN-Standard Test Method for Oxidation Stability of Mineral Insulating Oil | |
| ASTM D2440 | EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF MINERAL INSULATING OIL | |
| ASTM D2440 | EN-Standard Test Method for Oxidation Stability of Mineral Insulating Oil | |
| ASTM D2440 | EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF MINERAL INSULATING OIL | |
| ASTM D2440 | EN-Standard Test Method for Oxidation Stability of Mineral Insulating Oil | |
| ASTM D2440 | EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF MINERAL INSULATING OIL | |
| ASTM D2441 | EN-Standard Test Method for Hydrolyzable Chlorine Compounds in Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxing | |
| ASTM D2441 | EN-Standard Test Method for Hydrolyzable Chlorine Compounds in Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxing | |
| ASTM D2441 | EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE COMPOUNDS IN CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) BY REFLUXING | |
| ASTM D2441 | EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE COMPOUNDS IN CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) BY REFLUXING | |
| ASTM D2442 | EN-Standard Specification for Alumina Ceramics for Electrical and Electronic Applications | |
| ASTM D2442 | EN-Standard Specification for Alumina Ceramics for Electrical and Electronic Applications | |
| ASTM D2442 | EN-Standard Specification for Alumina Ceramics for Electrical and Electronic Applications | |
| ASTM D2443 | EN-Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment | |
| ASTM D2443 | EN-Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment | |
| ASTM D2443 | EN-STANDARD TEST METHODS FOR LACING TWINES AND TAPES USED AS HARNESSES IN ELECTRICAL EQUIPMENT (FEDERATION OF SOCIETIES FOR PAINT TECHNOLOGY STANDARD NO. LF 3-67) | |
| ASTM D2443 | EN-STANDARD METHODS OF TESTING LACING TWINES AND TAPES USED AS HARNESSES IN ELECTRICAL EQUIPMENT | |
| ASTM D2443 | EN-Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment | |
| ASTM D2444 | EN-Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) | |
| ASTM D2444 | EN-Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) | |
| ASTM D2444 | EN-Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) | |
| ASTM D2444 | EN-STANDARD TEST METHOD FOR DETERMINATION OF THE IMPACT RESISTANCE OF THERMOPLASTIC PIPE AND FITTINGS BY MEANS OF A TUP (FALLING WEIGHT) | |
| ASTM D2444 | EN-STANDARD TEST METHOD FOR IMPACT RESISTANCE OF THERMOPLASTIC PIPE AND FITTINGS BY MEANS OF A TUP (FALLING WEIGHT) | |
| ASTM D2445 | EN-STANDARD TEST METHOD FOR THERMAL OXIDATIVE STABILITY OF PROPYLENE PLASTICS (R 1981) (E1-1981) | |
| ASTM D2446 | EN-STANDARD SPECIFICATION FOR CELLULOSE ACETATE BUTYRATE (CAB) PLASTIC PIPE (SDR-PR) AND TUBING | |
| ASTM D2447 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80 Based on Outside Diameter | |
| ASTM D2447 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80 Based on Outside Diameter | |
| ASTM D2447 | EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULES 40 AND 80 BASED ON OUTSIDE DIAMETER | |
| ASTM D2447 | EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULES 40 AND 80 BASED ON OUTSIDE DIAMETER | |
| ASTM D2447 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80 Based on Outside Diameter | |
| ASTM D2447 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80 Based on Outside Diameter | |
| ASTM D2447 | EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULES 40 AND 80 BASED ON OUTSIDE DIAMETER | |
| ASTM D2447 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe Schedules 40 and 80 Based on Outside Diameter | |
| ASTM D2447 | EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULES 40 AND 80 BASED ON OUTSIDE DIAMETER | |
| ASTM D2448 | EN-Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment | |
| ASTM D2448 | EN-Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment | |
| ASTM D2448 | EN-Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment | |
| ASTM D2449 | EN-Standard Specification for Rubber Bales from Natural Sources - Limit on Coating | |
| ASTM D2449 | EN-STANDARD SPECIFICATION FOR RUBBER BALES FROM NATURAL SOURCES-LIMIT ON COATING | |
| ASTM D2449 | EN-Standard Specification for Rubber Bales from Natural Sources - Limit on Coating | |
| ASTM D2449 | EN-Standard Specification for Rubber Bales From Natural Sources-Limit on Coating | |
| ASTM D245 | EN-STANDARD PRACTICE FOR ESTABLISHING STRUCTURAL GRADES AND RELATED ALLOWABLE PROPERTIES FOR VISUALLY GRADED LUMBER | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-STANDARD PRACTICE FOR ESTABLISHING STRUCTURAL GRADES AND RELATED ALLOWABLE PROPERTIES FOR VISUALLY GRADED LUMBER | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-STANDARD METHODS FOR ESTABLISHING STRUCTURAL GRADES AND RELATED ALLOWABLE PROPERTIES FOR VISUALLY GRADED LUMBER (R 1986) | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D245 | EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber | |
| ASTM D2450 | EN-STANDARD TEST METHOD FOR BOND OF OIL- AND RESIN- BASE CAULKING COMPOUNDS (R 1981) | |
| ASTM D2450 | EN-Standard Test Method for Bond of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2451 | EN-Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash | |
| ASTM D2451 | EN-Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash | |
| ASTM D2451 | EN-STANDARD TEST METHOD FOR DEGREE OF SET FOR GLAZING COMPOUNDS ON METAL SASH (R 1993) (e1-1987) | |
| ASTM D2452 | EN-Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2452 | EN-Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2452 | EN-Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2452 | EN-STANDARD TEST METHOD FOR EXTRUDABILITY OF OIL- AND RESIN-BASE CAULKING COMPOUNDS (R 1993) (e1-1987) | |
| ASTM D2453 | EN-Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2453 | EN-Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2453 | EN-STANDARD TEST METHOD FOR SHRINKAGE AND TENACITY OF OIL- AND RESIN-BASE CAULKING COMPOUNDS (R 1993) | |
| ASTM D2453 | EN-Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2453 | EN-Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds | |
| ASTM D2453 | EN-STANDARD TEST METHOD FOR SHRINKAGE AND TENACITY OF OIL-AND RESIN-BASE CAULKING COMPOUNDS (R 1981) | |
| ASTM D2454 | EN-STANDARD PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS | |
| ASTM D2454 | EN-Standard Practice for Determining the Effect of Overbaking on Organic Coatings | |
| ASTM D2454 | EN-Standard Practice for Determining the Effect of Overbaking on Organic Coatings | |
| ASTM D2454 | EN-Standard Practice for Determining the Effect of Overbaking on Organic Coatings | |
| ASTM D2454 REV A | EN-STANDARD PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS | |
| ASTM D2455 | EN-Standard Test Method for Identification of Carboxylic Acids in Alkyd Resins | |
| ASTM D2455 | EN-STANDARD METHOD FOR IDENTIFICATION OF CARBOXYLIC ACIDS IN ALKYD RESINS (R 1981) (E1-1981) | |
| ASTM D2456 | EN-STANDARD METHOD FOR IDENTIFICATION OF POLYHYDRIC ALCOHOLS IN ALKYD RESINS (R 1981) (E1-1982) | |
| ASTM D2456 | EN-STANDARD TEST METHOD FOR IDENTIFICATION OF POLYHYDRIC ALCOHOLS IN ALKYD RESINS |