API - Research Reports Collection
This collection contains documents from the following standards organization(s): American Petroleum Institute 1 2 3 > >
| API REPORT 11 | EN-Field Tests of Small-Scale Pile Segments in a Soft Clay Deposit under Repeated Axial Loading | |
| API REPORT 12 | EN-Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates as Applicable to Offshore Structures | |
| API REPORT 13 | EN-Cyclic Lateral Loading of Piles; Analysis of Centrifuge Tests-Errata | |
| API REPORT 13 | EN-Axially-Loaded Centrifuge Pile Tests | |
| API REPORT 13A | EN-Analysis of Centrifuge Pile Tests; Simulation of Pile-Driving | |
| API REPORT 14 | EN-Inelastic Cyclic Behavior of Tubular Braced Frames | |
| API REPORT 17 | EN-Review of Gas Analysis Techniques for Application to Combustible Gas Detectors | |
| API REPORT 19 | EN-Strain Gage Test Results for Proposed 1-13/16 and 7-1/16 30 00 psi Rated API Flanges | |
| API REPORT 6 | EN-Design of Fittings to Reduce Wear Caused by Sand Erosion | |
| API REPORT 7 | EN-Horizontal Cyclic load Behavior of Small Scale Piles and Footings on Clay Foundations | |
| API REPORT 7 | EN-Cyclic Deformations of Offshore Structures on Clay | |
| API REPORT 8 | EN-Centrifuge Studies of Cyclic Lateral Load-Displacement Behavior of Single Piles | |
| API REPORT 9 | EN-A Model Study of Axially Loaded Pile Segments Including Pore Pressure Measurements | |
| API REPORT 9A | EN-AXCOL 3: A Program for Discrete-Element Solution of Axially Loaded Members with Linear or Nonlinear Supports | |
| API REPORT 9C | EN-Axcol 3: a Program for Discrete-Element Solution of Axially Loaded Members with Linear or Nonlinear Supports | |
| API REPORT 1 | EN-Orifice Coefficients for Two-Phase Flow Through Velocity Controlled Subsurface Safety Valves | |
| API REPORT 1114-5 | EN-Ultrasonic Testing Requirements for Single-Sided Butt Welds in Offshore Fabrications | |
| API REPORT 117 | EN-Thermal Properties of Hydrocarbon Bearing Rocks at High Temperatures and Pressures | |
| API REPORT 118 | EN-Tests of Fabricated Tubular Columns | |
| API REPORT 119 | EN-Ground Motion Intensity Factors and Acceleration Response Spectra Ninth Edition API RP 2A Earthquake Design Provisions Eastern Gulf of Alaska Region | |
| API REPORT 120 | EN-Bending Moment Capacity Calculations for Special API Clamp/Hub Combinations | |
| API REPORT 1974 | EN-VAPOR-LIQUID EQUILIBRIUM DATA FOR DESIGN OF SOUR WATER STRIPPERS ANNUAL REPORT FOR 1974 | |
| API REPORT 2 | EN-Detection and Prevention of Sand Erosion of Production Equipment | |
| API REPORT 2 CONDENSED | EN-Condensed Version of Detection and Prevention of Sand Erosion of Production Equipment | |
| API REPORT 26 | EN-Stage II - Time History Analyses Earthquake Analytical Studies for Offshore Structures | |
| API REPORT 26 | EN-Stage 1 - Baseline Analysis Earthquake Analysis Studies for Offshore Stuctures | |
| API REPORT 3 | EN-Oil Analysis in Production Discharges | |
| API REPORT 4 | EN-Corrosion Fatigue of Cathodically Protected Welded Carbon Steel in Cold Seawater | |
| API REPORT 5 | EN-Study of Pressure Drop and Closure Forces in Velocity-Type Subsurface Safety Valves | |
| API REPORT 7 | EN-Characterization of Soil Behavior Under Cyclic Loading as Applied to the Foundation Design of Offshore Structures | |
| API REPORT 78-18 | EN-Strain Gage Test Results for Proposed 1-13/16 and 7-1/16 30 00 psi Rated API Flanges | |
| API REPORT 79-12 | EN-Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates as Applicable to Offshore Structures | |
| API REPORT 79-14 | EN-Cyclic Inelastic Bahavior of Steel Offshore Structures | |
| API REPORT 79-20 | EN-The Propagating Buckle in Marine Pipelines | |
| API REPORT 79-21 | EN-Analysis of Flange and Clamp Joints Exposed to a Fire Environment | |
| API REPORT 79-22 | EN-Applicability of Reliability Analysis in Offshore Design Practice | |
| API REPORT 79-23 | EN-Development of an Analytical Model for the Ultimate Capacity of Axially Loaded Grouted Pile to Jacket Connections | |
| API REPORT 79-24 | EN-Plant Uptake and Accumulation of Metals Derived from Drilling Fluids | |
| API REPORT 79-25 | EN-Inelastic Structural Modeling of Braced Offshore Platforms for Seismic Loading | |
| API REPORT 79-27 | EN-Establishment Parameters to Which Gas Detector Equipment is Exposed in Offshore Oil and Gas Production Operations | |
| API REPORT 79-28 | EN-Review of the State-of-the-Art of Oil Spill Simulation Models Phase II | |
| API REPORT 79-28 | EN-Review of the State-of-the-Art of Oil Spill Simulation Models | |
| API REPORT 79-28 | EN-Review of the State-of-the-Art of Oil Spill Simulation Models Phase I | |
| API REPORT 79-28 | EN-Review of the State-of-the-Art of Probabilistic Oil Spill Simulation | |
| API REPORT 80-15 | EN-Probability-Based Fatigue Design Criteria for Offshore Structures | |
| API REPORT 80-22 | EN-Guidelines for Calibrating API RP2A for Reliability-Based Design | |
| API REPORT 80-24 | EN-Agronomic Impacts Resulting from Land Disposal of Used Drilling Fluids and Cuttings | |
| API REPORT 80-26A | EN-Acceleration Time Histories for Earthquake Analysis Studies of Offshore Structures | |
| API REPORT 80-26B | EN-Earthquake Analysis Studies for Offshore Structures Stage II - Time History Analysis | |
| API REPORT 80-29 | EN-Review and Compilation of File Test Results Axial File Capacity | |
| API REPORT 80-30A | EN-Collapse Performance of HC-95 Casing | |
| API REPORT 80-30B | EN-Collapse Resistance of Mill Selected High Collapse Grade 95 Casing | |
| API REPORT 80-31 | EN-Hydrodynamic Coefficients for Cylinders with Pronounced Marine Growths | |
| API REPORT 80-31B | EN-Hydrodynamic Coefficients for Cylinders with Pronounced Marine Growths | |
| API REPORT 80-32 | EN-Shaking Table Tests of a Tubular Steel Frame Model | |
| API REPORT 80-33 | EN-Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections | |
| API REPORT 80-34 | EN-Spectrum Fatique Properties of Welded Steel as Applicable to Offshore Structures-Errata | |
| API REPORT 80-35 | EN-Drill Pipe/Casing Protector Performance Testing | |
| API REPORT 80/27 | EN-Cyclic Inelastic Bahavior of Steel Offshore Structures | |
| API REPORT 81-15 | EN-Probability-Based Fatigue Design Criteria for Offshore Structures | |
| API REPORT 81-22 | EN-Utilization of a Reliability-Based API RP2A Format on a Platform Design | |
| API REPORT 81-29 | EN-Review and Compilation of Pile Test Results Axial Pile Capacity | |
| API REPORT 81-33 | EN-Effects of Fire Environment on Pressure Capability of Standard API and ANSI Connections Testing and Revised Analytical Procedure | |
| API REPORT 81-34 | EN-Spectrum Fatigue Properties of Welded Steel as Applicable to Offshore Structures | |
| API REPORT 81-37 | EN-Collapse Performance of Fabricated Cylinders Under Combined Axial Tension and External Pressure | |
| API REPORT 81-38 | EN-Experimental Study on the Effect of Axial Loading on Collapse Resistance of Casing | |
| API REPORT 81-39 | EN-Rheological Evaluation of Cement Slurries | |
| API REPORT 81-40 | EN-Chord Stress Effects on the Ultimate Strength of Tubular Joints | |
| API REPORT 81-43 | EN-Analysis of Trace Metals in Drilling Fluid Barite | |
| API REPORT 82-22 | EN-Utilizing a Reliability-Based API RP2A Format | |
| API REPORT 82-31 | EN-Hydrodynamic Coefficients for Cylinders Roughened by Marine Growths from the Gulf of Mexico | |
| API REPORT 82-34 | EN-Variable Deflection Fatigue Properties of Welded Steel as Applicable to Offshore Structures | |
| API REPORT 82-36 | EN-Development of Methods for the Evaluation of Perforators | |
| API REPORT 82-39 | EN-Rheological Evaluation of Cement Slurries | |
| API REPORT 82-41-1 | EN-Evaluation of P-Y Relationships in Sands | |
| API REPORT 82-41-2 | EN-Evaluation of P-Y Relationships in Clays | |
| API REPORT 82-42 | EN-Influence of Loading Rate on Axially Loaded Piles in Clay | |
| API REPORT 82-45 | ||
| API REPORT 82/83-46 | EN-Collapse Tests of Fabricated Cylinders Under Combined Axial Compression and External Pressure |
1 2 3 > >