ANSI - Mechanical Collection
This collection contains documents from the following standards organization(s): American National Standards Institute
| ANSI B151.1 | EN-Horizontal Injection Molding Machines - Safety Requirements for Manufacture Care and Use | |
| ANSI B151.15 | EN-Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Manufacture Care and Use-SPI | |
| ANSI B151.2 | EN-Plastic Film Casting Machinery - Manufacture Care and Use | |
| ANSI B151.20 | EN-Plastic Sheet Production Machinery - Manufacture Care & Use | |
| ANSI B151.21 | EN-Plastics Machinery - Injection Blow Molding Machines - Safety Requirements for Manufacture Care and Use | |
| ANSI B151.27 | EN-Plastics Machinery Robots Used with Horizontal and Vertical Injection Molding Machines Safety Requirements for the Integration Care and Use-Revision of ANSI/SPI B151.27-1994 | |
| ANSI B151.29 | EN-Plastics Machinery - Vertical Clamp Injection Molding Machines (VCIMM) - Safety Requirements for Manufacture Care and Use | |
| ANSI B151.4 | EN-Plastic Blown Film Machinery - Manufacture Care & Use | |
| ANSI B151.5 | EN-Plastic Film and Sheet Winding Machinery - Manufacture Care and Use | |
| ANSI B175.1 | EN-Power Tools - Gasoline- Powered Chain Saws - Safety Requirements | |
| ANSI B175.2 | EN-Power Tools - Hand-Held and Backpack Gasoline-Engine-Powered Blowers | |
| ANSI B175.3 | EN-Outdoor Power Equipment - Grass Trimmers and Bushcutters - Safety Requirements | |
| ANSI B175.4 | EN-For Outdoor Power Equipment - Portable Handheld Internal-Combustion-Engine-Driven Cut-Off Machines - Safety Requirements-: 1990 | |
| ANSI B212.10 | EN-Cutting Tools - Precision Indexable Insert Cartridges-This is Now Copyrighted by CCPA | |
| ANSI B212.11 | EN-Cutting Tools - Indexable Insert Shank- Type Milling Cutters (Inch Series) - Designation-This is Now Copyrighted by CCPA | |
| ANSI B212.12 | EN-Turning Tools - Commonly Used Indexable Inserts-Revision and Redesignation of ANSI B94.25-1982; This is Now Copyrighted by CCPA | |
| ANSI B212.12.1 | EN-Indexable Screw-On Inserts with Partly Cylindrical Fixing Holes Commonly Used for Turning-This is Now Copyrighted by CCPA | |
| ANSI B212.14 | EN-Carbide Seats Used With Indexable Inserts for Pin Lock-Type Holders-This is Now Copyrighted by CCPA | |
| ANSI B212.15 | EN-Cutting Tools - Carbide-Tipped Masonry Drills and Blanks for Carbide-Tipped Masonry Drills-Revision and Redesignation of ANSI B94.12-1977(R1987); Incorporates ANSI B212.15A-1995 Never Published; This is Now Copyright | |
| ANSI B212.16 | EN-Cutting Tools - Blanks for Carbide Burs-This is Now Copyrighted by CCPA | |
| ANSI B212.17 | EN-Cutting Tools - Bore-Type Milling Cutters (Inch Series) - Designation-This is Now Copyrighted by CCPA | |
| ANSI B212.18 | EN-for Inch Boring Bars for Indexable Inserts Designation and Dimensions-This is Now Copyrighted by CCPA | |
| ANSI B212.19 | EN-Cutting Tools - Designation System for Extra Hard Cutting Surfaces Bonded to Indexable Inserts and Other Carriers-This is Now Copyrighted by CCPA | |
| ANSI B212.2 | EN-Cutting Tools - Carbide Seats Used with Indexable Inserts for Clamp-Type Holders-This Is Now Copyrighted by CCPA | |
| ANSI B212.3 | EN-Cutting Tools - Precision Holders for Indexable Inserts-Revision of ANSI B212.3-1986; This IS Now Copyrighted by CCPA | |
| ANSI B212.4 | EN-Cutting Tools - Indexable Inserts - Identification System-This is Now Copyrighted by CCPA | |
| ANSI B212.5 | EN-Cutting Tools - Metric Holders for Indexable Inserts-This is Now Copyrighted by CCPA | |
| ANSI B212.6 | EN-Cutting Tools - Indexable (Throwaway) Hard-Metal Triangular and Square Inserts for Milling Cutters - Dimensions-This is Now Copyrighted by CCPA | |
| ANSI B212.7 | EN-Cutting Tools - Threaded Fasteners Used in the Carbide Tooling Industry-This is Now Copyrighted by CCPA | |
| ANSI B212.8 | EN-Cutting Tools - Carbide Blanks for Twist Drills Reamers End Mills and Random Rod-This is Now Copyrighted by CCPA | |
| ANSI B212.9 | EN-Cutting Tools - Carbide Blanks for Tipping Circular Saws-This is Now Copyrighted by CCPA | |
| ANSI B28.1 | EN-SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER AND PLASTICS INDUSTRIES-This is Now Copyrighted by RMA | |
| ANSI B3.1 | EN-Rolling Element Bearings - Aircraft Engine Engine Gearbox and Accessory Applications - Eddy Current Inspection | |
| ANSI B3.2 | EN-Rolling Element Bearings - Aircraft Engine Engine Gearbox and Accessory Applications - Surface Visual Inspection | |
| ANSI B3.3 | EN-Rolling Element Bearings - Aircraft Engine Engine Gearbox and Accessory Applications - Surface Temper Etch | |
| ANSI B71.1 | EN-Consumer Turf Care Equipment Walk-Behind Mowers and Ride-On Machines with Mowers Safety Specifications | |
| ANSI B71.10 | EN-Small Off-Road Ground-Supported Outdoor Power Equipment - Gasoline Fuel Systems - Performance Specifications and Test Procedures | |
| ANSI B71.3 | EN-Snow Throwers - Safety Specifications | |
| ANSI B71.4 | EN-Commercial Turf Care Equipment - Safety Specifications | |
| ANSI B71.6 | EN-Powered Shredder/GrindersShredder/BaggersChippersand Walk-Behind Chipper/Vacuums - Safety Specifications | |
| ANSI B71.8 | EN-Outdoor Power Equipment - Walk-Behind Powered Rotary Tillers and Hand Supported Cultivators - Safety Specifications | |
| ANSI B74.10 | EN-Grading of Abrasive Microgrits-Now Copyrighted by UAMA | |
| ANSI B74.16 | EN-Checking the Size of Diamond Abrasive Grain-Now Copyrighted by UAMA | |
| ANSI B74.2 | EN-Specifications for Shapes and Sizes of Grinding Wheels and for Shapes Sizes and Identification of Mounted Wheels-Now Copyrighted by UAMA | |
| ANSI B74.20 | EN-Specifications for Grading of Diamond Powder in Sub-Sieve Sizes-Now Copyrighted by UAMA | |
| ANSI B74.21 | EN-Fatigue Proof Test Procedure for Vitrified Grinding Wheels-Now Copyrighted by UAMA | |
| ANSI B74.22 | EN-Design Test for Type 27 Portable Grinding Wheels-Now Copyrighted by UAMA | |
| ANSI B74.5 | EN-Test for Capillarity of Abrasive Grains-Now Copyrighted by UAMA | |
| ANSI B74.6 | EN-Procedure for Sampling of Abrasive Grains-Now Copyrighted by UAMA | |
| ANSI B74.8 | EN-Ball Mill Test for Friability of Abrasive Grain-Now Copyrighted by UAMA | |
| ANSI B77.1 | EN-Passenger Ropeways - Aerial Tramways Aerial Lifts Surface Lifts Tows and Conveyors - Safety Requirements | |
| ANSI B77.2 | EN-for Funiculars - Safety Requirements | |
| ANSI CATALOG | EN-ANSI Approved Standards | |
| ANSI S2.8 | EN-Guide for Describing the Characteristics of Resilient Mountings |