Print Page Email Page Smaller Text Larger Text

AFNOR - Speciall TH1 Collection

This collection contains documents from the following standards organization(s): Association Francaise de Normalisation

AFNOR L41-114 EN-Contamination in aircraft fluid circuits. Filters and filter elements. Migration of the filter medium. 
AFNOR L41-118 EN-Contamination in aircraft fluid circuits. Filters and filter elements. Method for determining the state of cleanliness. 
AFNOR L41-120 EN-Contamination in aircraft hydraulic circuits. Filters. Definitions and characteristics. 
AFNOR L41-121 EN-Contamination in aircraft hydraulic circuits. Filters. Determination hydraulic pressure drop versus flow characteristics. 
AFNOR L41-122 EN-Contamination in aircraft hydraulic circuits. Filters. Cold start. 
AFNOR L41-123 EN-Contamination in aircraft hydraulic circuits. Filters. Absolute filtration rating measurement. 
AFNOR L41-125 EN-Contamination in aircraft hydraulic circuits. Filters. Method for checking collapsing or bursting resistance. 
AFNOR L41-126 EN-Contamination in aircraft hydraulic circuits. Filters. Fatigue test inducted by flow cyclic variations. 
AFNOR L41-127 EN-Contamination of aircraft hydraulic systems. Filters and filter elements. Filtration efficiency and rating of retention capacity. 
AFNOR L41-130 EN-Contamination of aircraft fuel systems. Filters and filter elements. Definitions and characteristics. 
AFNOR L41-131 EN-Contamination of aircraft fuel systems. Filters and filter elements. Determination of pressure drop according to flow rate and temperature. 
AFNOR L41-132 EN-Contamination of aircraft fuel systems. Filters and filter elements. Method for checking the compatibility of materials constituting filter elements with fuels. 
AFNOR L41-133 EN-Contamination in aircraft fuel systems. Filters and filters elements. Absolute filtration rating measurement. 
AFNOR L41-135 EN-Contamination in aircraft fuel systems. Filters. Method for checking collapsing or bursting resistance. 
AFNOR L41-137 EN-Contamination of aircraft fuel systems. Filters and filter elements. Filtration efficiency. 
AFNOR L54-001 EN-Aerospace equipment. Elements of electrical connection. Fondamental characteristics and test methods. 
AFNOR L59-710 EN-Aerospace applications. Printed wiring boards. Protective varnish. 
AFNOR L60-210 EN-Definition of characteristic parameters of passive couplers with multimodal optical fibres. 
AFNOR L70-112 EN-Aircraft equipment. On board instrument with round dials for front and rear mounting. 
AFNOR L70-113 EN-Aircraft equipment. On board instrument with round dials in cylindrical housings. 
AFNOR L92-101 EN-Aircraft. Four-wheel-drive tow tractors. Performance requirements factors for design. 
AFNOR L92-601 EN-Air cargo equipment. Ground handling and transport systems for unit load devices. Minimum requirements. 
AFNOR L92-605 EN-Air cargo. Minimium requirements for future wide-body aircraft cargo systems and compartments (intermodal). 
AFNOR L92-613 EN-Air cargo equipment. Unit load devices transport vehicle (utv). Functional requirements. 
AFNOR L92-615 EN-Aircraft. Self-propelled gantry for lifting air cargo containers and outsize cargoes. Functional requirements. 
AFNOR L93-002 EN-Air cargo equipment. Automobile transport devices. Basic requirements. 
AFNOR L93-102 EN-Air cargo equipment. Air mode insulated containers. Thermal efficiency requirements. 
AFNOR M62-103 EN-Radiation protection. Installations for industrial gamma radiography. Diminution of ionizing radiation by protective screens. 
AFNOR M62-221 EN-Limiting enclosures. Design elements. Basic data. 
AFNOR M81-680 EN-Mining equipment. Fire protection in diesel powered equipment recommendations for the manufacturers of medium capacity mobile loaders with tyres (2 M3 bucket) and similar equipment. 
AFNOR M81-681 EN-Mining equipment. Fire protection in diesel powered equipment. Recommendations for the manufacturers of suspended locomotives. 
AFNOR M82-424 EN-Ntpf thread for joints for hydraulic transmissions. 
AFNOR M82-610 EN-Mining equipment. Miners helmets. Characteristics and tests. 
AFNOR M87-701 EN-Tank wagons for petroleum and assimilated products. Discharge fitting. Car-fixed device. 
AFNOR M88-040 EN-Road vehicles used in airports. Plugs on filling ports. Conventional colours. 
AFNOR M88-102 EN-Tanks for transport of dangerous goods. Rules for tank manufacture. Design of the welded tank assemblies. 
AFNOR M88-104 EN-Tanks for transport of dangerous goods. Containers inspection rules. Inspection of the welded joints on the basis of the joint coefficients. 
AFNOR M88-121 EN-Tanks for transprot of liquid dangerous goods with design pressure not exceeding 50 kpa. Single unloading valves. 
AFNOR M88-301 EN-Reinforced plastics road tankers. Design and calculation. 
AFNOR M88-772 EN-Liquefied hydrocarbon systems in cylinders. "Service - Reserve" indicator for propan installation with automatic with automatic coupler-reserver. Construction. Operation. Marking. Test. 
AFNOR NF A01-830 EN-Zinc for galvanizing purposes. Sampling for analysis. 
AFNOR NF A02-015 EN-Iron and steel. Conventional identification of steels by colours. 
AFNOR NF A03-010 EN-Metallic materials. Wire. Reverse bend test. 
AFNOR NF A03-117 EN-Quality control surveillance of steel products. 
AFNOR NF A03-118 EN-Steel products. Quality assurance. 
AFNOR NF A03-202 EN-Metal products. Mechanical tests. Grey cast iron impact test (on unnotched beam). 
AFNOR NF A03-263 EN-Copper. Bending test for round tubes for capillary brazing and soldering. 
AFNOR NF A03-268 EN-Aluminium and aluminium alloys. Copper and copper alloys. Simple torsion test for wire. 
AFNOR NF A03-400 EN-Iron and steel. General principles of the fatigue test. 
AFNOR NF A03-401 EN-Iron and steel. Fatigue test by axial loading. 
AFNOR NF A03-402 EN-Iron and steel. Fatigue test by rotary flexion. 
AFNOR NF A03-509 EN-Iron and steel. Calibration of fatigue test machines. 
AFNOR NF A03-604 EN-Foundry products-pigs. Iron-machinability testing. 
AFNOR NF A03-654 EN-Iron and steel. Free cutting steel and structural steel. Methods of control of machinability by turning using high speed steel cutting tools. 
AFNOR NF A03-655 EN-Iron and steel. Free-cutting steels and structural steel. Method of control of machinability by turning using sintered metallic carbide cutting tools. 
AFNOR NF A03-657 EN-Iron and steel products. Steel cold ductility determination. Compression test. 
AFNOR NF A03-658 EN-Iron and steel - Methode of determination of the plastic strain ration r of steel sheet and plate 
AFNOR NF A03-659 EN-Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate 
AFNOR NF A03-702 EN-Iron and steel products. Testing of tin coatings on iron and steel thread. 
AFNOR NF A03-707 EN-Simple torsion testing of steel wires. 
AFNOR NF A03-820 EN-Zinc and zinc alloys. Method for the Vickers hardness testing on foils and coils. 
AFNOR NF A03-830 EN-Zinc and zinc alloys. Fatigue test (flat bending) of sheet foil and die cast pieces. 
AFNOR NF A04-105 EN-Iron and steel. Methods of determination of the non metallic inclusion content of wrought steels. Part 1 : macroscopic methods. 
AFNOR NF A04-107 EN-Iron and steel. Micrographic method of determination of the non metallic inclusion content of unalloyed wire rod. 
AFNOR NF A04-108 EN-Iron and steel. Characterization of sulfide shapes in structural steels with improved machinability using standard diagrams. Micrographic method. 
AFNOR NF A04-111 EN-Iron and steel. Micrographic determination of the extent of decarburisation of non alloy high carbon steel wire rod. 
AFNOR NF A04-112 EN-Iron and steel. Macrographic method of showing and describing the chemical heterogeneity of effervescent steel wire rod. 
AFNOR NF A04-121 EN-Iron and steel. Magnetic particle examination of longitudinal products. Detection of surface defects. 
AFNOR NF A04-194 EN-Foundry products. Guideline for acceptance criteria of discontinuities on machined surfaces. 
AFNOR NF A04-197 EN-Foundry products - Spheroidal graphite cast iron castings - Characterisation of the shape of the graphite by image analysis 
AFNOR NF A04-204 EN-Steel products. Determination of the total or conventional thickness of surface hardened thin layers. 
AFNOR NF A04-503 EN-Semi-products made from aluminium copper nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys. 
AFNOR NF A04-505 EN-Semi-products made from aluminium copper nickel and their alloys. Determination of grain size. Nickel and nickel alloys. 
AFNOR NF A05-109 EN-Corrosion of metals and alloys - Neutral salt spray test - Electroplated or non-electroplated zinc and alloyed zinc coatings with or without conversion 
AFNOR NF A05-150 EN-Steel products. Techniques of micrographic examination. 
AFNOR NF A05-154 EN-Steel products. Metallographic replica techniques. (optical examination). 
AFNOR NF A05-156 EN-Iron and steel. Macrographic examination by sodium sulphur print (socalled lead print method). 
AFNOR NF A05-301 EN-Aluminium alloys. Stress corrosion cracking of thick products. 
AFNOR NF A05-302 EN-Prestressing members. Stress corrosion test in distilled water.