A/E/C REFERENCED STANDARDS - IPC (Excludes AWS) Collection
This collection contains documents from the following standards organization(s):
American Society of Sanitary Engineering, NSF International, Underwriters Laboratories Inc., ASME International, ASTM International, American Water Works Association, American National Standards Institute
Most Popular Standards from the A/E/C REFERENCED STANDARDS - IPC (Excludes AWS) Collection
| ASSE 1037 | EN-Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures | |
| ASTM D4021 | EN-Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks | |
| ASTM D2657 | EN-Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings | |
| ASTM F477 | EN-Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe | |
| ASTM A53/A53M REV A | EN-Standard Specification for Pipe Steel Black and Hot-Dipped Zinc-Coated Welded and Seamless | |
| ASTM F714 REV A | EN-Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter | |
| ASTM B828 | EN-Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings | |
| ASME A112.6.1M | EN-Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use | |
| ASTM A53/A53M | EN-Standard Specification for Pipe Steel Black and Hot-Dipped Zinc-Coated Welded and Seamless | |
| AWWA C652 | EN-Disinfection of Water-Storage Facilities | |
| ASTM D2239 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter | |
| ASTM B88 | EN-Standard Specification for Seamless Copper Water Tube | |
| ASTM A312/A312M REV A | EN-Standard Specification for Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| UL 508 | EN-UL Standard for Safety Industrial Control Equipment-Seventeenth Edition; Reprint with Revisions Through and Including 7/11/2005 | |
| ASSE 1016 | EN-Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/ Shower Combinations | |
| ASSE 1018 | EN-Performance Requirements for Trap Seal Primer Valves - Potable Water Supplied | |
| ASTM F493 | EN-Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings | |
| ASTM D1869 | EN-Standard Specification for Rubber Rings for Asbestos-Cement Pipe | |
| ASSE 1060 | EN-Performance Requirements for Outdoor Enclosures for Fluid Conveying Components | |
| ASME B16.11 | EN-Forged Fittings Socket-Welding and Threaded | |
| ASME A112.1.3 | EN-Air Gap Fittings for Use with Plumbing Fixtures Appliances and Appurtenances | |
| ASSE 1007 | EN-Performance Requirements for Home Laundry Equipment | |
| ASSE 1009 | EN-Performance Requirements for Commercial Food Waste Grinder Units | |
| ASME A112.3.4 | EN-Macerating Toilet Systems and Related Components | |
| ASME B16.22 | EN-Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | |
| ASME A112.19.3 | EN-Stainless Steel Plumbing Fixtures (Designed for Residential Use)-Supplement: September 2002 | |
| ASTM D1785 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Schedules 40 80 and 120 | |
| ASTM D2846/D2846M | EN-Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems | |
| ASTM C76 REV B | EN-Standard Specification for Reinforced Concrete Culvert Storm Drain and Sewer Pipe | |
| ASTM D2564 | EN-Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems | |
| ASTM D2241 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) | |
| ASTM A888 REV A | EN-Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain Waste and Vent Piping Applications | |
| ASME B16.3 | EN-Malleable Iron Threaded Fittings Classes 150 and 300 | |
| ASTM D2729 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings | |
| ASTM D2672 REV A | EN-Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement | |
| ASTM D3034 REV A | EN-Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings | |
| AWWA C651 | EN-Disinfecting Water Mains | |
| ASME B16.9 | EN-Factory-Made Wrought Buttwelding Fittings | |
| ASTM A312/A312M | EN-Standard Specification for Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| ASTM B75 | EN-Standard Specification for Seamless Copper Tube | |
| ASTM D2466 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 40 | |
| ASTM D2467 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80 | |
| ASTM A74 | EN-Standard Specification for Cast Iron Soil Pipe and Fittings-AASHTO No.: M263-77 | |
| ASTM B42 | EN-Standard Specification for Seamless Copper Pipe Standard Sizes | |
| ASTM D2855 | EN-Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings | |
| ASTM B43 | EN-Standard Specification for Seamless Red Brass Pipe Standard Sizes | |
| ASTM A733 | EN-Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | |
| ASME A112.19.2 | EN-Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6 | |
| ASTM D2661 | EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain Waste and Vent Pipe and Fittings | |
| ASTM F1488 | EN-Standard Specification for Coextruded Composite Pipe |