A/E/C REFERENCED STANDARDS - IPC Collection
This collection contains documents from the following standards organization(s):
American Society of Sanitary Engineering, NSF International, Underwriters Laboratories Inc., ASME International, CSA Standards, ASTM International, American Welding Society, American Water Works Association, CSA America Inc., American National Standards Institute
Most Popular Standards from the A/E/C REFERENCED STANDARDS - IPC Collection
| AWS A5.8/A5.8M | EN-Specification for Filler Metals for Brazing and Braze Welding-Incorporating Errata:2004 | |
| ASSE 1037 | EN-Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures | |
| ASTM D4021 | EN-Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks | |
| ASTM D2657 | EN-Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings | |
| ASTM F477 | EN-Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe | |
| ASTM A53/A53M REV A | EN-Standard Specification for Pipe Steel Black and Hot-Dipped Zinc-Coated Welded and Seamless | |
| ASTM F714 REV A | EN-Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter | |
| ASTM B828 | EN-Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings | |
| ASME A112.6.1M | EN-Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use | |
| ASTM A53/A53M | EN-Standard Specification for Pipe Steel Black and Hot-Dipped Zinc-Coated Welded and Seamless | |
| AWWA C652 | EN-Disinfection of Water-Storage Facilities | |
| ASTM D2239 | EN-Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter | |
| ASTM B88 | EN-Standard Specification for Seamless Copper Water Tube | |
| ASTM A312/A312M REV A | EN-Standard Specification for Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| UL 508 | EN-UL Standard for Safety Industrial Control Equipment-Seventeenth Edition; Reprint with Revisions Through and Including 7/11/2005 | |
| ASSE 1016 | EN-Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/ Shower Combinations | |
| ASSE 1018 | EN-Performance Requirements for Trap Seal Primer Valves - Potable Water Supplied | |
| ASTM F493 | EN-Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings | |
| ASTM D1869 | EN-Standard Specification for Rubber Rings for Asbestos-Cement Pipe | |
| ASSE 1060 | EN-Performance Requirements for Outdoor Enclosures for Fluid Conveying Components | |
| ASME B16.11 | EN-Forged Fittings Socket-Welding and Threaded | |
| CSA B64.10-01/B64.10.1-01 | EN-Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance and Field Testing of Backflow Prevention Devices-Fourth Edition; General Instruction No. 1; Update No. 2; Supplement | |
| ASME A112.1.3 | EN-Air Gap Fittings for Use with Plumbing Fixtures Appliances and Appurtenances | |
| ASSE 1007 | EN-Performance Requirements for Home Laundry Equipment | |
| ASSE 1009 | EN-Performance Requirements for Commercial Food Waste Grinder Units | |
| CSA B79-05 | EN-Floor drains area drains shower drains and cleanouts in residential construction | |
| ASME A112.3.4 | EN-Macerating Toilet Systems and Related Components | |
| ASME B16.22 | EN-Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | |
| ASME A112.19.3 | EN-Stainless Steel Plumbing Fixtures (Designed for Residential Use)-Supplement: September 2002 | |
| ASTM D1785 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Schedules 40 80 and 120 | |
| ASTM D2846/D2846M | EN-Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems | |
| ASTM C76 REV B | EN-Standard Specification for Reinforced Concrete Culvert Storm Drain and Sewer Pipe | |
| ASTM D2564 | EN-Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems | |
| ASTM D2241 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) | |
| ASTM A888 REV A | EN-Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain Waste and Vent Piping Applications | |
| ASME B16.3 | EN-Malleable Iron Threaded Fittings Classes 150 and 300 | |
| ASTM D2729 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings | |
| ASTM D2672 REV A | EN-Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement | |
| ASTM D3034 REV A | EN-Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings | |
| AWWA C651 | EN-Disinfecting Water Mains | |
| ASME B16.9 | EN-Factory-Made Wrought Buttwelding Fittings | |
| ASTM A312/A312M | EN-Standard Specification for Seamless Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| ASTM B75 | EN-Standard Specification for Seamless Copper Tube | |
| ASTM D2466 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 40 | |
| ASTM D2467 | EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80 | |
| ASTM A74 | EN-Standard Specification for Cast Iron Soil Pipe and Fittings-AASHTO No.: M263-77 | |
| ASTM B42 | EN-Standard Specification for Seamless Copper Pipe Standard Sizes | |
| ASTM D2855 | EN-Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings | |
| ASTM B43 | EN-Standard Specification for Seamless Red Brass Pipe Standard Sizes | |
| ASTM A733 | EN-Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |