Print Page Email Page Smaller Text Larger Text

A/E/C REFERENCED STANDARDS - IBC (Excludes AWS) Collection

This collection contains documents from the following standards organization(s): Underwriters Laboratories Inc., Consumer Product Safety Commission, American Society of Civil Engineers, American Concrete Institute, U.S. Department of Labor, Canadian General Standards Board, FM Approvals, ASTM International, American National Standards Institute, ASME International


Most Popular Standards from the A/E/C REFERENCED STANDARDS - IBC (Excludes AWS) Collection

ASTM E331 EN-Standard Test Method for Water Penetration of Exterior Windows Skylights Doors and Curtain Walls by Uniform Static Air Pressure Difference 
ASTM A123/A123M EN-Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products 
ICC ICC/ANSI A117.1 EN-Accessible and Usable Buildings and Facilities 
ASTM A435/A435M EN-Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates 
ASTM C1063 EN-Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster 
ASTM A480/A480M EN-Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate Sheet and Strip 
ASTM A1008/A1008M REV B EN-Standard Specification for Steel Sheet Cold-Rolled Carbon Structural High-Strength Low-Alloy High-Strength Low-Alloy with Improved Formability Solution Hardened and Bake Hardenable 
ASTM A615/A615M REV A EN-Standard Specification for Deformed and Plain Carbon Steel Bars for Concrete Reinforcement-AASHTO No.: M 31 
ASTM E1886 EN-Standard Test Method for Performance of Exterior Windows Curtain Walls Doors and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials 
ASME A17.1 EN-Safety Code for Elevators and Escalators-Addenda A: 2005; Supplement: 08/12/2005 
ASTM C1314 REV B EN-Standard Test Method for Compressive Strength of Masonry Prisms 
ASTM D4945 EN-Standard Test Method for High-Strain Dynamic Testing of Piles 
ASTM F1667 EN-Standard Specification for Driven Fasteners: Nails Spikes and Staples 
AA ASM35 EN-Specifications for Aluminum Sheet Metal Work in Building Construction Construction Manual Series Section 5-Fourth Edition 
ASTM A951/A951M EN-Standard Specification for Steel Wire for Masonry Joint Reinforcement 
ASTM C946 EN-Standard Practice for Construction of Dry-Stacked Surface-Bonded Walls 
ASTM D86 EN-Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure 
ASTM D2487 EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) 
ASTM D422 EN-Standard Test Method for Particle-Size Analysis of Soils 
ASTM A240/A240M REV A EN-Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate Sheet and Strip for Pressure Vessels and for General Applications 
ASTM A36/A36M EN-Standard Specification for Carbon Structural Steel 
ASTM C109/C109M EN-Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 
ASTM A283/A283M EN-Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates 
ASTM A307 EN-Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength 
ASTM E1300 EN-Standard Practice for Determining Load Resistance of Glass in Buildings 
ASTM A572/A572M EN-Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel-AASHTO No.: M223 
ASTM C67 EN-Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile 
ASTM D1586 EN-Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils 
ASTM A6/A6M REV A EN-Standard Specification for General Requirements for Rolled Structural Steel Bars Plates Shapes and Sheet Piling 
ASME A18.1 EN-Safety Standard for Platform Lifts and Stairway Chairlifts 
ASTM D448 REV A EN-Standard Classification for Sizes of Aggregate for Road and Bridge Construction 
ASTM A307 EN-Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength 
ASTM A588/A588M EN-Standard Specification for High-Strength Low-Alloy Structural Steel up to 50 ksi [345 MPa] Minimum Yield Point with Atmospheric Corrosion Resistance-AASHTO No.: M 222 
ASTM E330 EN-Standard Test Method for Structural Performance of Exterior Windows Doors Skylights and Curtain Walls by Uniform Static Air Pressure Difference 
ASTM D4829 EN-Standard Test Method for Expansion Index of Soils 
ASTM C754 EN-Standard Specification for Installation of Steel Framing Members to Receive Screw- Attached Gypsum Panel Products 
ASTM C36/C36M EN-Standard Specification for Gypsum Wallboard 
ASTM B88 EN-Standard Specification for Seamless Copper Water Tube 
ASTM D3957 EN-Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings 
ASTM G154 EN-Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials 
ASTM A641/A641M EN-Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire 
ASTM C847 EN-Standard Specification for Metal Lath 
ASTM D422 EN-Standard Test Method for Particle-Size Analysis of Soils 
ASTM D93 REV A EN-Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester-IP Designation: 34/99 
ASTM A722/A722M EN-Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete 
ASTM D25 EN-Standard Specification for Round Timber Piles 
ASTM E96/E96M EN-Standard Test Methods for Water Vapor Transmission of Materials 
ASTM D6164 EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements 
ASTM E1602 EN-Standard Guide for Construction of Solid Fuel Burning Masonry Heaters 
UL 94 EN-UL Standard for Safety Test for Flammability of Plastic Materials for Parts in Devices and Appliances-Fifth Edition; Reprinted with Revisions Through and Including 12/12/2003