A/E/C REFERENCED STANDARDS - IBC Collection
This collection contains documents from the following standards organization(s): National Fire Protection Association, CSA Standards, Underwriters Laboratories Inc., Consumer Product Safety Commission, American Society of Civil Engineers, American Concrete Institute, U.S. Department of Labor, Canadian General Standards Board, FM Approvals, ASTM International
| ASTM C955 | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C955 | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C955 | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C955 | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C955 REV A | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C955 REV A | EN-Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases | |
| ASTM C956 | EN-Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete | |
| ASTM C957 | EN-Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface | |
| ASTM C957 | EN-Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface | |
| ASTM C957 | EN-Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface | |
| ASTM C957 REV A | EN-Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface | |
| ASTM C957/C957M | EN-Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface | |
| ASTM C960/C960M | EN-Standard Specification for Predecorated Gypsum Board | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-20th Edition; Incorporated Errata 1 | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-Incorporates Errata 1:2004 | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-21st Edition | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-22nd Edition | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-21st Edition; Incorporates Errata: 2/2009 | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-Errata 1:2004; Errata 2:2004 | |
| AWS D1.1/D1.1M | EN-Structural Welding Code - Steel-Errata 1:2004; Errata 2:2004; Errata 3:2005 | |
| AWS D1.1/D1.1M ERTA 1 AND 2 | EN-Structural Welding Code - Steel-20th Edition | |
| AWS D1.1/D1.1M ERTA 2 | EN-Structural Welding Code - Steel-21st Edition; Errata to Second Printing | |
| AWS D1.3 | EN-Structural Welding Code - Sheet Steel | |
| AWS D1.3 ERTA | EN-Structural Welding Code - Sheet Steel | |
| AWS D1.3/D1.3M | EN-Structural Welding Code - Sheet Steel-5th Edition; Incorporates Errata: 11/2008 | |
| AWS D1.3/D1.3M | EN-Structural Welding Code - Sheet Steel-5th Edition | |
| AWS D1.4 | EN-Structural Welding Code - Reinforcing Steel | |
| AWS D1.4 | EN-Structural Welding Code - Reinforcing Steel-Errata-Included | |
| AWS D1.4/D1.4M | EN-Structural Welding Code - Reinforcing Steel | |
| AWS D1.4/D1.4M | EN-Structural Welding Code - Reinforcing Steel-Incorporates Errata: 10/2005 | |
| ASTM D1143 | EN-Standard Test Method for Piles under Static Axial Compressive Load | |
| ASTM D1143/D1143M | EN-Standard Test Methods for Deep Foundations Under Static Axial Compressive Load | |
| ASTM D1143/D1143M | EN-Standard Test Methods for Deep Foundations Under Static Axial Compressive Load | |
| ASTM D1227 | EN-Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing | |
| ASTM D1227 | EN-Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing | |
| ASTM D1227 | EN-Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing | |
| ASTM D1557 | EN-Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56 00 ft-lbf/ft3(2700 kN-m/m3)) | |
| ASTM D1557 | EN-Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56 00 ft-lbf/ft3 (2700 kN-m/m3)) | |
| ASTM D1557 | EN-Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56 00 ft-lbf/ft3 (2700 kN-m/m3)) | |
| ASTM D1557 | EN-Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56 00 ft-lbf/ft3(2700 kN-m/m3)) | |
| ASTM D1586 | EN-Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils | |
| ASTM D1586 | EN-Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils | |
| ASTM D1586 REV A | EN-Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils | |
| ASTM D1761 | EN-Standard Test Methods for Mechanical Fasteners in Wood | |
| ASTM D1761 | EN-STANDARD TEST METHODS FOR MECHANICAL FASTENERS IN WOOD | |
| ASTM D1761 | EN-Standard Test Methods for Mechanical Fasteners in Wood | |
| ASTM D1761 | EN-Standard Test Methods for Mechanical Fasteners in Wood | |
| ASTM D1761 | EN-Standard Test Methods for Mechanical Fasteners in Wood | |
| ASTM D1863 | EN-Standard Specification for Mineral Aggregate Used on Built-Up Roofs | |
| ASTM D1863 | EN-Standard Specification for Mineral Aggregate Used on Built-Up Roofs | |
| ASTM D1929 | EN-Standard Test Method for Determining Ignition Temperature of Plastics | |
| ASTM D1929 | EN-Standard Test Method for Determining Ignition Temperature of Plastics | |
| ASTM D1929 | EN-Standard Test Method for Determining Ignition Temperature of Plastics | |
| ASTM D1970 | EN-Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection | |
| ASTM D1970 | EN-Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection | |
| ASTM D1970 | EN-Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection | |
| ASTM D2166 | EN-Standard Test Method for Unconfined Compressive Strength of Cohesive Soil | |
| ASTM D2166 | EN-Standard Test Method for Unconfined Compressive Strength of Cohesive Soil | |
| ASTM D2166 | EN-Standard Test Method for Unconfined Compressive Strength of Cohesive Soil | |
| ASTM D2178 | EN-Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing | |
| ASTM D2178 | EN-Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing | |
| ASTM D2178 REV A | EN-Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing | |
| ASTM D2216 | EN-Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass | |
| ASTM D2216 | EN-Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass | |
| ASTM D225 | EN-Standard Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules | |
| ASTM D225 | EN-Standard Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules | |
| ASTM D226 | EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D226 | EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D226 | EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D226 REV A | EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D226/D226M | EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D227 | EN-Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing | |
| ASTM D2487 | EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | |
| ASTM D2487 | EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | |
| ASTM D2487 | EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | |
| ASTM D2487 | EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) | |
| ASTM D25 | EN-Standard Specification for Round Timber Piles | |
| ASTM D25 | EN-Standard Specification for Round Timber Piles |